Technical data
25
+
-
CIB
CIB
COM1
COM2
COM3
SA3 - 012M
1
COM1
18
2
28
3
38
4
48
5
COM2
58
6
68
7
78
8
88
9
COM3
98
10
108
11
118
12
128
L
N
AC 230 V
SA3-012M 8595188132466
4
66
12 x NO 8 A/AC1
250 V AC1, 30 V DC
2000 VA/AC1, 240 W/DC
20 A/<3s
3.75 kV, SELV by EN 60950
1000 V AC
16 A
10 mA / 10 V
300 min
-1
15 min
-1
1 x 10
7
1 x 10
5
12 x yellow LED
CIB
green LED RUN
230V AC/20 mA
max. 2.5 mm
2
/1.5 mm
2
with sleeve
-20 to +55 °C
-30 to +70 °C
IP 20 device, IP 40 mounting in the switchboard
operative control device
individual control device
1.B.E
FR-0
class 2
2.5 kV
II.
2
any
switchboard on DIN rail EN 60715
6-MODULE
90 x 105 x 65 mm
460 g
Output:
Switched voltage:
Switched output:
Peak current:
Insulation voltage between relay
outputs and internal circuits:
Insulationg voltage between
individual relay outputs RE1-RE4;
RE5-RE8; RE9-RE12:
Max. current by common terminal:
Minimal switched current:
Switching frequency without load:
Switching frequency with rated load:
Mechanical life:
Electrical life AC1:
Output indication:
Installation BUS:
Status indication unit:
Supply voltage/rated current:
Terminal:
Operating temperature:
Storing temperature:
Protection degree:
Control device purpose:
Control device constuction:
Automatic operation characteristic:
Heat and fi re resistance category:
Anti-shock category (immunity):
Rated impulse voltage:
Overvoltage category:
Pollution degree:
Operating position:
Installation:
Design:
Dimensions:
Weight:
The actuator is designed for switching to twelve various appliances and loads with
potentialless contact.
SA3-12M is a switching actuator containing 12 independent relays with NO potentialless
contacts, with the fact that each quaternion relay switches the same potential.
Maximal loadability of contacts is 8 A/2000 VA/AC1.
Each of the twelve output contacts are individually controllable and addressable.
Actuator is powered by an AC voltage 230V.
CIB is galvanically separated from the internal circuits of unit.
LED on front panel signalizes state of each output.
Contact status of each relay can be changed separately and manually by control buttons
on a front panel.
SA3-012Mis normally supplied in the option AgSnO
2
contact material, the order can be
supplied with contact AgNi by request.
SA3-012M in design 6-MODULE is designed to be mounted into a switchboard, onto
DIN rail EN60715.
DIMENSIONS AND WEIGHT
CONNECTION
OPERATING CONDITIONS
POWER SUPPLY
COMMUNICATION
OUTPUTS
Example of connection
TECHNICAL PARAMETERS
EAN code
Switching actuator, 12-channel SA3-012M