Technical data
26
SA3-01B
16A /4000VA
250Vµ AC1
SA3-02B
8A /2000VA
250Vµ AC1
+
-
CIB
L
N
+
-
CIB
CIB
L
N
SA3-01B SA3-02BSA
3
-
0
1
B
SA3-02B 8595188132367
SA3-01B 8595188132350
CIB
AC 230 V
AC 230 V
Switching actuators SA3-01B, SA3-02B
SA3-01B SA3-02B
Actuators are designed for switching of one (SA3-01B), respectively two (SA3-02B) of
various appliances and loads relay output (potentialless contact).
SA3-01B contains 1 relay with switching potentialless contact with max. load 16A/4000 VA/AC1.
SA3-02B contains 2 relays with switching potentialless contacts with max. load 8A/2000 VA/AC1.
Output contacts are separately controllable and addressable.
Both relay actuator SA3-02B are individually decorated input terminals, and therefore
can switch various independent potentials.
Thanks to changeover contacts, the SA3-02B actuator can used to control a 230V drive
(such as blinds, shutters or awnings), whereas by proper bridging of contacts, it is
possible to secure locking hardware options while switching on phase two outputs.
Actuators are equipped with a temperature input for connecting an external two-wire
temperature sensor TC / TZ (see accessories).
LED on front panel signalizes state of each output.
SA3 is normally supplied in the option AgSnO
2
contact material. It can be
supplied with contact AgNi by request.
SA3-01B, SA3-02B are designed for mounting into the installation box
Example of connection SA3-01B
Example of connection SA3-02B
Yes, input for external thermo sensor TC, TZ
-20 to +100°C; 0.5°C from the range
1x NO 16 A/AC1 2 x NC 8 A/AC1
250 V AC1, 24 V DC
4000 VA/AC1, 384 W/DC 2000 VA/AC1, 192 W/DC
30 A/<3s
3.75 kV, SELV by EN 60950
x 1000 V AC
100 mA 100 mA/10 V
1200 min
-1
300 min
-1
6 min
-1
15 min
-1
3 x 10
7
1 x 10
7
0.7 x 10
5
1 x 10
5
yellow LED 2x yellow LED
CIB
27 V DC/30 mA 27 V DC/50 mA
green LED RUN
terminal, 0.5 - 1 mm
2
2x conduct. CY, Ø 2.5 mm
2
6x conduct. CY, Ø 0.75 mm
2
-20 to +55 °C
-30 to +70 °C
IP 30
operative control device
individual control device
1.B.E
FR-0
class 2
2.5 kV
II.
2
any
into installation box
49 x 49 x 21 mm
43 g 45 g
Temperature measuring:
Scope and accuracy of tem. meas.:
Output:
Switching voltage:
Switched load:
Surge current:
Insulation voltage between
outputs and built-in circuits:
Insulation voltage between
relay outputs RE1-RE2:
Minimal switching current:
Switching frequency/no load:
Switching frequency/rated load:
Mechanical lifetime:
Electrical lifetime for AC1:
Output indication:
Installation BUS:
Supply voltage/rated current:
Status indication unit:
Data terminals:
Power outputs:
Operating temperature:
Storage temperature:
Protection degree:
Control device purpose:
Control device construction:
Characteristics of automatic operation:
Heat and fi re resistance category:
Anti-shock category (immunity):
Rated impulse voltage:
Overvoltage category:
Pollution degree:
Operating position:
Installation:
Dimensions:
Weight:
DIMENSIONS AND WEIGHT
CONNECTION
OPERATING CONDITIONS
OUTPUTS
COMMUNICATION
POWER SUPPLY
INPUTS
TECHNICAL PARAMETERS
EAN code
EAN code
temperature sensor TC/TZ
temperature sensor TC/TZ