Technical data

48
+
-
CIB
CIB
IDRT3-1 8595188132510
With IDRT3-1 the circuit heating/cooling can be corrected to within ± 5 ° C, or you can
enter the desired temperature in the room in absolute value.
The display shows the current temperature and after pressing one of two buttons
under the display, you can control the desired temperature.
Readability improves after pressing one of the buttons to activate the backlight.
Heating/cooling circuit is assigned with a thermo-regulator using iNELS Designer and
Manager (IDM) .
In the case of temperature correction within ± 5 °C, this change is valid until the next
time mark within the time schedule established in IDM .
IDRT3 -1 in design LOGUS90 is intended for mounting into an installation box.
YES, built-in thermo sensor NTC
0 to +55°C; 0.3°C from range
±5°C or abs. value
2 x buttons
CIB
symbol display
YES
27 V DC/20 mA from CIB BUS
0.5 - 1 mm
2
0 to +50 °C
IP 20
II.
2
vertical, downward with CIB terminal
into installation box
85.6 x 85.6 x 20 mm
94 x 94 x 20 mm
73 g
Temperature measuring:
Range / accuracy of temp.measuring:
Heating/cooling circuit correction:
Manual ontrol of heating/
cooling circuit:
Installation:
Display:
Backlight:
Supply voltage/rated current:
Terminals:
Operating temperature:
Protection degree:
Overvoltage category:
Pollution degree:
Operation position:
Installation:
Dimensions (plastic):
Dimensions (metal, glass, wood, granite):
Weight:
DIMENSIONS AND WEIGHT
CONNECTION
OPERATING CONDITIONS
POWER SUPPLY
COMMUNICATION
INPUTS
TECHNICAL PARAMETERS
Example of connection
EAN code
IDRT31
Digital room thermo-regulator IDRT3-1