Technical data

56
LEGEND:
Heating regulation Switching appliances Controlling lighting
Controlling binds, garage
HOTEL ROOM
EST-3
TOUCH SCREEN PANEL
Control unit with touch screen display with which
it is possible to control elements on the bar by just
lightly touching the screen. Designed for surface
mounting or in an installation cabinet.
SHUTTER ACTUATOR
Switching actuator for controlling shutters,
blinds and awnings Contains temperature input.
Mounting in an installation cabinet.
JA3-02B
NEL
play
EL
a
Mo
u
Moun
WSB3-20G/40G
4-CHANNEL WALL CONTROLLER
Controls lights, binds, shutters and other appli-
ances. Contains a temperature sensor. Design
Elegant or LOGUS
90
.
SINGLE-CHANNEL SWITCHING ACTUATOR
This is designed to switch all kinds of appliances
and loads by dry contact. Designed for mounting
in an installation cabinet.
SA3-01B
CU3-01M - CENTRAL UNIT
PS3-100/iNELS - POWER SUPPLY
BPS3-01M - BUS SEPARATOR
DA3-22M - DIMMING ACTUATOR
THE „GO-BETWEEN“ between the user program environment
and other sensors and actuators connected to the bus.
Switched stabilized power supply. Used to feed control ma-
chines within the framework of the iNELS intelligent electrical
Serves for impedance separation of the CIB bus from the
voltage supply.
Designed for dimming light sources RLC (automatic detection),
can also be used to switch appliances.
ELEMENTS IN THE SWITCH BOARD
SA3-04M - SWITCHING ACTUATOR
Designed for switching di erent appliances and loads potential
free contact.
LEGEND:
Detectors
FAMILY HOME
Heating regulation Switching appliances
Controlling lighting
Controlling shutters
CU3-01M - CENTRAL UNIT
PS3-100/iNELS - POWER SUPPLY
BPS3-02M - BUS SEPARATOR
DA3-22M - DIMMING ACTUATOR
GSM3-01 - GSM GATE
MEDIATOR,, among user program surrounding and other sen-
sors and actuators connected to bus.
Stabilized switching power supply, serves for supplying of cont-
rol automats in intelligent electro-installation iNELS.
Designed for impedance separation of CIB from supply
voltage power.
Designed for dimming of lights with RLC characteristic (auto-
matic detection). It is alsosuitable for switching of appliance.
Js designed for communication with iNELS system, via SMS
messagecommands sent from mobile GSM phones.
UNITS IN A SWITCHBOARD
SA3-012M - SWITCHING ACTUATOR
DAC3-04M - CONVERTER
(DIGITAL - ANALOG)
Designed for switching various appliances and
loads by a  oating contact .
Designed for switching various appliances and
loads by a  oating contact.
WSB3-20G/40G
WMR3-11
IM3-40B
4 CHANNEL WALL CONTROLLER
Controls lights, jalousies, shutters and other
appliances, in LOGUS
90
design.
CARD READER
Is intended for reading of contactless
media ( chip cards, key chains,..)
BINARY INPUT UNIT
Designed for connection of 2, 4
or 8 devices with potential-less
contacts (switches, buttons, PIR
sensors, fi re and gas detectors
etc.).
IDRT3-1
DIGITAL THERMO REGULATOR
Control unit for a correction of heating circle
in iNELS system, available in LOGUS
90
design.
EST-3
TOUCH PANEL
Control unit with touch-screen display by which
it is possible to control bus units by a slight touch
of a display. In version for mounting on surface or
into an installation box.
i
SHUTTER ACTUATOR
Switching actuator for operating
of shutters, venetian blinds, sun-
blinds, thermo input is included,
mounting into installation box.
JA2-02B
J
A2-02
B
0
0
-
10
10
0
0
0
0
V
V
0 - 10 V
PIR MOTION DETECTOR
Rotects your house against move of unfa-
miliar people inside the house in time when
you are not at home.
SMOKE DETECTOR
Product serves for a detection of fi re
danger in interior of residential or
commercial buildings.
JS-20 PIR
SD-280
2 pc
2 pc
SWITCHING ACTUATOR 1FOLD
The unit can be used for example to cont-
rol the Thermodriver. In to installation box.
SA3-01B
Case studies