User guide

- 6 -
The tab Audio zone is used to activate and set the IMM audio zone function
To update the FW in the LARA Radio device, it is rst
necessary to download the update le with the extension
„*.lfw“ from the address http://www.elkoep.cz/ke-stazeni/
software/
Pressing the button starts the update, the progress of which
is illustrated graphically. Reading a damaged or invalid le
prevents the following updating steps, and it is necessary to
repeat the process with the correct update le
Audio zone:
Updating FW:
Select le:
Updating FW:
The control element enables activation and deactivation of the IMM audio zone function
IP server: enter the IP address of the IMM server in decimal format separated by periods
Name of zone: displayed in the IMM environment
Pressing „Select le“ brings up a dialog window for searching and
selecting the update le.
After opening the selected le, its contents are checked, and the
user is then informed of the result. If the correct le has been
selected, the FW version number is displayed.
Audio zone:
Updating FW:
- The product is not communicating, the display is not illuminated
Solution: Check the power supply: Check to see if the product is connected to the power supply and if the RJ45 connector is connected to the product. Check if the power source Poe is connected to the network.
- The product is illuminated but the radio does not play.
Solution: Check the Ethernet network connection. Disconnect and reconnect the RJ45 Ethernet connector. After repeated connection, the product displays system information; if within ve seconds the player display does not appear,
there must be some network connection issues, check the network settings.
- Restart the product.
If there is no problem with the above-mentioned points and all settings are correctly set, perform a restart by briey pressing the RESET button or by disconnecting and reconnecting the power supply.
- Interrupted playing, frequent reading of the radio.
Probably insucient Internet connection speed.
Troubleshooting
Maintaining the device
The device front panel and frame can be cleaned using a dry or slightly moistened rag with a mild soap solution. Avoid use of other cleaning agents
The company ELKO EP, as the manufacturer, is entitled to make technical modications to the product, in the technical specication and product manual, without prior notication. ELKO EP bears no liability for possible incompleteness and mistakes in this document.