Installation Guide

www.ellasbubbles.com
Deluxe . Elite . Royal . Petite . Companion
Installation of Deck Mount Grab Bar
PARTS LIST: Chrome grab bar x (1)
Escutcheon x (2)
Rubber washers x (4)
Metal washers x (2)
Machine thread bolts x (2)
Tub Shell
To install the supplied grab bar first locate all the parts needed for instalation. (see
image 10). Ready the bolt assembly by first placing a metal washer onto the bolt
followed by a rubber washer. Feed the bolt up through the tub shell and place
another rubber washer over the extruded bolt followed by the escutcheon. You may
start the threading into the grab bar to hold the assembly loosley in position and
then repeat the process for the second bolt. Once the entire assembly is in place,
tighten the bolts with the supplied allen wrench.
5
(Image 10)
*WARNING: Under no circumstances install the grab bar without the large metal
washer underneath the tub shell. Doing so will leave the tub shell vulnerable to
cracking and void the warranty. If washers are missing they may be replaced by
calling 1-800-480-6850
*