Installation Guide

www.ellasbubbles.com
Deluxe . Elite . Royal . Petite . Companion
Finishing Installation
After all of the plumbling testing is completed, and all xtures are checked, the tub can be
installed to the surrounding wall or walls. Ella Walk in Baths come with low rise tile ange
which allows for two or one wall installations. The extension panel of the bathtub can be
installed as needed for 60” openings.
The tub can be nished and tiled over as shown in images. Caulking must be applied to
joints as needed after the bathtub is installed.
Lowering the threshold is an option that can be choosen durring instalation. Because your
Ella Walk in Bath is set up for easy installation, lowering the threshold requires the drain
option to be set up below the oor (see pg. 6). To lower the Walk in Bath threshold; First,
remove the toe kick panel to expose the adjustable leg supports. Adjust the height of the
tub while keeping the Walk in Bath plumb level on all four corners. Finish the installation
with basebord. (Image 18)
NOTE: Any alterations or installed additions are the responsibility of the installer. Ella Walk
in Baths is not responsible for any damage to the unit or for water damage, which could
occur due to improper installation.
7
(Image 17)
Threshold Lowering Option