Full Product Manual

Finishing Installation

www.ellasbubbles.com Page 14 02/16

After all of the water and electrical testing is completed and all xtures are checked, the

tub can be installed to the surrounding wall or walls. The Ella Elite Walk In Bathtub comes

with a low rise tile ange which allows for two or one wall installations.

The tub can be nished and tiled over as shown in images. Caulking must be applied to

joints as needed after the bathtub is installed.

Threshold Lowering Option

Lowering the threshold is an option that can be chosen during installation. Because your Ella

Elite is set up for easy installation, lowering the threshold requires the drain option to be set

up below the oor (Page #6). To lower the Walk in Bath threshold; First, remove the toe kick

panel to expose the adjustable leg supports. Adjust the height of the tub while keeping the

tub plumb level on all four corners. Finish the installation with baseboard.

NOTE: Any alterations or installed additions are the responsibility of the installer. Ella

Accessible Bathrooms is not responsible for any damage to the unit or for water damage,

which could occur due to improper installation.

Drywall

Glue

Tile

Caulking

5/8”Tub Lip

Stud

Drywall

Glue

Tile

5/8”Tub Lip

Caulking

Panel On Panel Off Lowered Threshold Baseboard On (not supplied)