Full Product Manual

Preparing the Sub-oor

Prepare the sub-oor for the drain and ensure that the area is level. The supporting sub-oor

must be able to support the total weight of the bathtub, bather and water.

Use a level and make sure that the sub-oor below the tub is leveled. If the oor is not

perfectly level, adjust the appropriate leveling legs to re-align the tub to perfect level. It is

important that all of the leveling legs are completely supporting the tub (touching the oor

with equal weight distribution) and the tub is leveled for the door seal to work properly. If the

tub is not perfectly leveled, it could result in water leakage and void the warranty.

NOTE: Adjust the legs and lower the bath to within 1/16th of an inch above the oor or tile.

Seal with white silicone or caulking if appropriate. If the sub-oor does not support the total

weight of the bath, bather and the water, it can result in warping of the shell, misalignment

of the door and/or create leaks and damages to the building structure.

Disclaimer:

In an effort to continually improve

our product, specications and

congurations are subject to change

without notice. Before ordering or

installing, consider future access to

essential equipment.

Black Nut

Adjustable Height Leg

Make sure all 8 legs are level

Air Pump

Brackets

Hydro Pump

Brackets