Use and Care Manual

www.ellasbubbles.com
Cleaning and Maintenance
Regular care of your Ella Walk in Bath will keep it clean and have it working at its best for
many years to come.
DO NOT under any circumstances use wire brushes, metal sponges, steel wool, or scouring
pads on any part of your Ella Walk in Bath.
DO NOT under any circumstances use powerful solvents such as acetone, lacquer, paint
thinner, benzene or abrasive cleaner on any part of your Ella Walk in Bath.
DO NOT use ammonia or chlorine based agents on any plated surface, as they will de-plate
the surface and void your warranty.
DO NOT use any liquids, powders or oils in the water if you have an air and/or Hydro system.
Oil or grease spots can be lied with denatured alcohol.
Use liquid, non-bleach dish washing detergent to remove any construcon residue.
Lightly rubbing with a liquid cleaning compound (such as a polishing compound for cars)
followed by a light applicaon of liquid or paste wax will restore luster to a dulled surface.
Clean plated surfaces with warm water only.
It is strongly suggested to keep the door in an open posion allowing the door seal to
remain relaxed while the tub is not in use to extend the lifeme of the door seal.
22