Use and Care Manual

www.ellasbubbles.com

Preparing for Installaon

Remove access panels that are held on by magnets. Remove these by using the orange

sucon cups on the panel and put them in a safe place unl installaon is complete.

Orange Sucon Cup

Place all accessories to the side. Make sure no loose parts are hanging. Li and carry the bath

only by the deck or frame. Protect the boom of the bath to avoid breaking the jets at the

boom. Only accessories approved by Ella Walk in Bath should be used with this product.

All Ella Walk in Tubs are tested and operated in our factory prior to shipment . Transportaon

and/or mishandling may cause leaks. Tesng the Walk in Bath while you have access to all

sides is imperave! ONLY aer all of the water and electrical tesng is completed, and all

ﬁxtures are checked, the tub should be installed to the surrounding wall or walls.

Place the Walk in Bath on a ﬂat surface where the water can be drained.

With a clean rag, clean the door seal on your walk in tub to remove any debre le from the

manufacturing process.

Front

Panel