Use and Care Manual

www.ellasbubbles.com
Installaon -Leveling the Walk in Bath
Remove the exisng tub and the wall and floor materials as required.
Clean area of any debris or trash.
Use 5 foot level and determine if the floor is level. If the floor is not level adjust all leveling feet to
perfectly level the tub.
Make sure you level the walk in tub from the highest elevaon point on the floor.
Feet on the Walk in Bath need to be leveled
All leveling feet of the Walk in Bath must be touching the floor, evenly supporng the weight of
the bathtub for the door to work properly without leaks.
Start by adjusng the outside legs and make sure they are plumb level. Connue to adjust the
legs by adjusng the (2) two in the center of your Walk in Bath. Rough in your plumbing opons
before leveling, as some opons may cause clearance issues underneath the tub.
5