Use and Care Manual

Regular care of your Ella Walk In Tub will keep it clean and have it working at its best for

many years to come. The best way to counteract from detrimental affects occurring is to

prevent water from remaining on any nished surface on the Walk In Tub. Wipe down your

Walk In Tub after every use!

DO NOT under any circumstances use wire brushes, metal sponges, steel wool, or scouring

pads on any part of your Ella Walk In Tub.

DO NOT under any circumstances use powerful solvents such as acetone, lacquer, paint

thinner, benzene or abrasive cleaner on any part of your Ella Walk In Tub.

DO NOT use ammonia or chlorine based agents on any plated surface, as they will de-plate

the surface and void your warranty.

DO NOT use any liquids, powders or oils in the water if you have an air and/or Hydro system.

Oil or grease spots can be lifted with denatured alcohol.

Use liquid, non-bleach dish washing detergent to remove any construction residue.

To restore luster to a dulled surface, lightly rub a liquid compound (such as a polishing

compound for cars) followed by a light application of liquid or paste wax.

Cleans plated surfaces with warm water only.

It is strongly suggested to keep the door in an open position allowing the door seal to

remain relaxed while the tub is not in use to extend the lifetime of the door seal.

Cleaning and Maintenance