Use and Care Manual

ManualsBrandsElla ManualsBathFront Entry 2.75 ft. x 38 in. Walk-In Bathtub in White with Right Hinge Outswing Door

Over-ow Plumbing Diagram

Waste & Overow Assembly Instructions

Sch 40 PVC Fittings

Solid Brass Finished Trim

Adjustable Head Angle

Lever Handle for Overow

1. Dry Fit the PVC pipe prior to nal assembly to ensure the lengths are correct. Orient Tee

as show.

2. Glue ttings using appropriate cement and primer as required by local codes.

3. Mount 792W45 TO D505h-1 using the 4 ears. Place 792RW between Bath Shoe Elbow and

under side of tub.

4. Place a thin bead of silicone caulking around the D50-7 Strainer and place it in the tub

outlet. Draw the Strainer against the Bath Shoe Elbow with the Strainer Retainer Screw. Do

not over tighten or damage can occur.

5. Place the Overow Nut through the Overow Plate and draw the Flex Head against the

tub by tightening the Nut. Do not over tighten or damge can occur.

6. Slide Overow Plate onto stem extending from the Flex Head Assembly. Tighten D50-12H

into groove in stem to hold handle in place.

7. Adjust stopper height with the adjustment screw and holding the screw height in place

with the Stopper Lock Nut.

D50FH-2

FLex Head

Socket

D50FH-3

Socket Washer

D50FH-4

Socket Nut

D50FH-1 Flex

Head Assembly

Less Cable

792ws

Overflow

Gasket

D50-10

Overflow

Plate

D50-1

Overflow

Plate

D50-11

Overflow

Nut

D50-12H

Lever For

Handle

D50-5W

Stopper

Washer

D50-45

45”Cable

D50-3

Stopper

Lock Nut

D50-2T

Stopper

D50-4 Stopper

Adjustment Screw

D50-6

Strainer Retainer

D50-7

Strainer

792RW-LT

Bath Shoe Washer

Bath Show Elbow Less

Cable D50-8

4C-W

PVC Tee