Use and Care Manual

An extension Panel is used to extend the length of your Ella Walk In Tub to a 60" length. Some

installations require trimming the extension Panel. Cutting the extension pieces should be

done with a reciprocation saw; a progressive blade is best or a bi-metal blade will work as

well.

Measure the distance between the wall and the Walk In Tub by the three corners and at the

middle of each length so as to detect any variance in the shape of the wall.

Use masking tape to cover where the cut will be made and then make your marks on the

tape. Trim the pieces while cutting through the tape to ensure a clean cut.

REMEMBER: Make sure your measurements are correct before making nal cut.

Some installations may use trim molding along the bottom. Use Silicone to adhere the

molding to your Walk In Tub.

Finishing Installation