Use and Care Manual

1. Remove the existing tub and the wall and oor materials as required.

2. Clean area of any debris or trash.

3. Use 4 foot level and determine if the oor is level. If the oor is not level adjust all leveling

feet to perfectly level the tub.

4. Make sure you level the Walk In Tub from the highest elevation point on the oor.

Feet on the Walk In Tub need to be leveled

5. All leveling legs of the Walk In Tub must be resting on the oor evenly supporting the

weight of the bathtub, in order for the door to work properly without leaks.

6. Start by adjusting the outside legs and make sure they are level. Continue to adjust the

legs by adjusting the two (2) in the center of your Walk In Tub. Rough in your plumbing

options before leveling, as some options may cause clearance issues underneath the

tub.

Installation of Bath