Specification

ManualsBrandsElla ManualsBathElite 52 in. Walk-In Whirlpool and Air Bath Bathtub in White with RH Door, Thermostatic Faucet, Dual Drain,Shower Screen

Table Of Contents

please visit www.ellasbubbles.com for more information

1. Acrylic Tub Shell:

High quality acrylic

Excellent color uniformity

High Gloss White Finish

Fiberglass Reinforced

Lifetime limited warranty on acrylic walk in tub shell,

frame, and door

5 year parts warranty (please visit www.ellasbubbles.com

for more detailed information)

Included Features

Warranty

Elite

Actual Size: 29.75x52.25x38

Seat Width: 21.75 inches

Shipping Size: 32x54x50

Shipping Weight: 275 lbs.

Net Weight: 205 lbs.

Water Capacity: 75 gal.

Occupied: 35-55 gal.

Drainage Time: +/- 80 sec at

ideal home plumbing conditions

(occupied)

Elite - Inward Swing Door

Walk In Bathtub Specifications

2. Stainless Steel Frame with Adjustable Leveling Legs

3. Inward swing removeable brushed stainless steel door

with tempered glass

4. Two (2) front and one (1) end removable access panel

5. Stainless steel chrome finish U-shape deck mount grab

bar

6. Stainless steel chrome finish wall mount grab bar

7. Extension panel, filler for 60" alcove installations

8. 360 Removable swivel tray

Floor Drains - 2 Options

1. Two (2) 2" PVC T-type two (2) outlet drain with

endcaps Two (2) overflows

and cable operated

openers with extended handles for easier grip in

chrome finish

2. Two (2) 2" Brass threaded floor drains with copper

overflow and cable operated opener with

extended handle

Optional Jetting

(Please refer to diagrams below based on selected package)

1 of 11

Electrical Requirements:

Please refer to Technical Diagrams for more information

Optional Jetting

(Please refer to diagrams below based on selected package)

Optional Features

1. Heated Seat and Backrest 4AMP 470W

2. LED Chromatherapy Light .04AMP (Hydro + Air Package)

3. Aromatherapy

4. On/Off Push Controls or Digital Controller

1. Five-Piece Thermostatic Control Valve Faucet Set

7-8 GPM (average) @ 60 PSI at ideal in home plumbing

conditions

Two (2) 2-way diverters with extension handles

Pull out, hand held, chrome plated hand shower with 5

ft. retractable stainless steel braided hose

1 year warranty

2. Five-Piece Fast Fill Huntington Brass Faucet Set

14-18 GPM (average) @ 60 PSI at ideal in home

plumbing conditions

Pull out, hand held, chrome plated hand shower with 5

ft. retractable stainless steel braided hose

5 year warranty

visit www.huntingtonbrass.com/warranty for full warranty

information

3. Five-Piece Jandon Roman Faucet Set

14-16 GPM (average) @ 60 PSI at ideal in home

plumbing conditions

Pull out, hand held, chrome plated hand shower with 5

ft. retractable stainless steel braided hose

5 year warranty

visit https://www.jandonfaucet.com/ for full warranty

information

Faucet Options

4. Dual Jetting (Air + Hydro)

5. Soaking (No Jetting Option)

1. Hydro Massage System

2. Air Massage System

Air Massage Pump 4.5AMP 486W

Refer to technical drawing for jet count

3 Speed Pump

Autopurge (Activates 20 minutes after pump shutdown)

Hydro Massage Pump 5AMP 600W

Hydro massage intensity dial air control

In-line water heater 5.5AMP 650W

Ozone Sterilization

Refer to technical drawing for jet count

1HP Pump 10AMP 1200W

Pressure Vessel

On/Off Push Control

Agitator Valve

3. MicroBubble Therapy System

Summary of content (14 pages)

PAGE 1
Elite - Inward Swing Door Walk In Bathtub Specifications Elite Actual Size: 29.75x52.25x38 Seat Width: 21.75 inches Shipping Size: 32x54x50 Shipping Weight: 275 lbs. Net Weight: 205 lbs. Water Capacity: 75 gal. Occupied: 35-55 gal. Drainage Time: +/- 80 sec at ideal home plumbing conditions (occupied) Optional Jetting Included Features (Please refer to diagrams below based on selected package) 1.
PAGE 2
Elite - Inward Swing Door Walk In Bathtub Drawing with 2" T Type Dual Port Drain (Option 1) *For more information please visit www.ellasbubbles.
PAGE 3
Elite - Inward Swing Door Walk In Bathtub Drawing with 2" Brass Dual Drain (Option 2) *For more information please visit www.ellasbubbles.
PAGE 4
-Fold BathScreen Installation Instructions
PAGE 5
●Please read these instructions in full before installing. IMPORTANT ●Check that the bath has been installed to the manufacturer’s instructions. ●Opening wall adjustments 4-Fold Bath Screen - adjustment =44"-42"(1108-1118mm) GENERAL SAFETY INSTRUCTIONS ●Do not fix the wall profile to newly plastered, painted or papered walls as chemical reaction may cause discolouration to the surface finish. ●lmportant: The wall plugs included in this pack are for solid walls only.
PAGE 6
IDENTIFICATION OF PARTS N4FS08 N4FS07 N4FS06 N4FS05 N4FS10 N4FS04 N4FS09 N4FS01 N4FS02 N4FS03 Fixings & fittings supplied Quantity Item No.: N4FS01 x1 N4FS07 x1 N4FS02 x1 N4FS08 x9 N4FS03 x1 N4FS09 x4 x4 N4FS10 x4 x4 N4FS11 Item No.
PAGE 7
LH RH Four fold bath screen is ok to be installed in left hand or right hand. Below steps are based on left hand. For right hand, please follow below steps in mirror direction. THE SCREEN MUST BE INSTALLED ON THE OPPOSITE SIDE OF THE EXTENSION PANEL. FAILURE TO DO SO WILL RESULT IN A GAP BETWEEN THE SCREEN AND TUB DECK 1. N4FS08 N4FS02 9X 1X - Put top cover(N4FS08) on the top of the pivot of the screen frame(N4FS02).
PAGE 8
2. - Loosen the screw in the bottom of the vertical profile, remove the bottom bracket. - Cut the soft edge of the seal N4FS03 by 3"(75mm) on one end. - Insert the seal into the bottom aluminum frame. - Tie off the end of the seal keep it from moving. - Put the bottom cap on the vertical profile, fix it with screw. N4FS03 1X Note: Please observe cut required. 3 "( 7 5 m m ) N4FS02 3. - Put the wall profile(N4FS01) against the wall and ensure it is vertical using a spirit level.
PAGE 9
- Drill the holes(Ø6mm) according to the marks and 4. N4FS06 insert the wall plugs(N4FS06) into the holes. 4X N4FS06 5. N4FS05 N4FS01 - Fasten wall profile(N4FS01) on the wall with screw (N4FS05).
PAGE 10
6. - Insert screen panel into wall profile. - There is 0.39"(10mm )adjustment between panel and wall profile for any out of true walls. - Adjust the screen panel in correct position and make sure glass panel fits parallel to the bath edge, but does not sit down directly on bathtub edge. 0 .3 9 "( 1 0 7. mm) N4FS04 N4FS09 N4FS10 3.2 ST4X10 4X 4X 4X - From inside drill through the vertical profile and into wall profile where shown, using a 3.2 mm drill.
PAGE 11
8. - Put top cap N4FS07 on the top of wall profile. N4FS07 1X N4FS07 9. SILICO NE - Apply silicone sealant to the outside of the enclosure. Please note: Do not apply silicone sealant to the inside of the enclosure. Sealant drying times may vary in cold damp conditions and will be extended where thicker beads of sealant are applied. Allow sealant to dry completely before exposing to water.
PAGE 12
10. N4FS11 SILICONE GREASE - Before the first use, apply the silicone grease on each joint part as below drawing to make the opening and closing smoothly. 1X Cleaning and Maintenance: Please do not use abrasive or strong cleaning solutions on the shower enclosure, such as alcohol, petroleum liquids or any other chemical cleaner. Should there be any dirty stains on the shower enclosure, please clean it with a soft lint free cloth and warm soapy water. Please rinse it with clean water afterwards.
PAGE 13
11. You may need to cut into the 4-Fold Screen if your walk-in bathtub has a tile edge or decorative deck lip. Please see below. If your walk-in bathtub has a tile edge or decorative deck lip, you will need to carefully cut out a small section so that your 4-fold screen will sit flush with the tub deck.
PAGE 14
12. WARNING The 4-fold Screen MUST BE installed on the opposite side of the extension panel as shown below. Failure to do so WILL result in a gap between the screen and the tub. If your walk-in bathtub has a flange or tile edge, please refer to step 11. You will need to CAREFULLY cut out a notch as illustrated on step 11 in the aluminum frame of the screen for it to sit flush with the deck of your walk-in bathtub.