Manualshelf

Installation Guide

ManualsBrandsElla ManualsBathPetite 52 in. Acrylic Walk-In Air Bath and MicroBubble Bathtub in White, Thermostatic Faucet Set, RHS 2 in. Dual Drain
11121314151617181920
Parts List: Chrome grab bar x (1)
Escutcheon x (2)
Rubber washers x (4)
Metal washers x (2)
Bolts x (2)
To install the supplied grab bar rst locate all the parts needed for installation. See drawing
shown above. Ready the bolt assembly by rst placing a metal washer onto the bolt
followed by a rubber washer. Feed the bolt up through the tub shell and place another
rubber washer over the extruded bolt followed by the escutcheon. You may start the
threading into the grab bar to hold the assembly loosely in position and then repeat the
process for the second bolt. Once the entire assembly is in place, tighten the bolts with the
supplied Allen wrench.
WARNING: Under no circumstances install the grab bar without the large metal washer
underneath the tub shell. Doing so will leave the tub shell vulnerable to cracking and void
the warranty.
Installation of Deck Mount Grab Bar
www.ellasbubbles.com Page 17 09/17
Grab Bar
Escutcheon
Rubber
Washer
Rubber
Washer
Metal
Washer*
Bolt
Tub Shell