Installation Guide

1.
3. & 4.
L" Stainless Steel Brackets ...........................
L" Acrylic Bracket ........................................
1" x 1/8" Bolts ...............................................
1" x 1/4" Bolts ...............................................
1" Screw .......................................................
1/2" Nuts .......................................................
3/8" Nuts .......................................................
Medium Washers .........................................
Small Washers ..............................................
Plastic Washer .............................................
Plastic Cap ...................................................
Installing Extension Kits
Qty (3)
Qt y (1)
Qty (7)
Qty (7)
Qt y (1)
Qty (9)
Qty (7)
Qty (14)
Qty (14)
Qt y (1)
Qt y (1)
1. Install 3 extension support
brackets
provides in the kit.
2. Clamp in place, the
extension panel to the walk
in tub shell, lining up the
facade of top and front.
3. Pre-drill (+3/8") slightly wider
holes than mounting screws
to allow for nal adjustment
to the panel.
4. Mount extension with 7
screws, washers and bolts.
5. Apply Silicone or white
caulking as needed.
The extension kit can be installed as needed. Opening can be lled as desired.
www.ellasbubbles.com
Deluxe . Elite . Royal . Petite . Companion
Installing Extension Kits
4
(Image 4)
www.ellasbubbles.com
S-Class2853 Dimensions: 7"W x 28"L x 38"H
S-Class3655 Dimensions: 5"W x 36"L x 38"H
S-Class3052 Dimensions: 8"W x 29 3/4"L x 38"H
S-Class3060: No panel
15