User's Manual
Table Of Contents
- 1. Safety Information
- 2. New Order Contents
- 3. TrackSense® LyoPro 10-Slot Reader Station
- 4. Activating ValSuite®
- 5. How to Start Logging Data with TrackSense LyoPro
- 6. TrackSense® LyoPro Loggers
- 6.1. TrackSense® LyoPro
- 7. Battery
- 8. Calibration
- 9. Accessories
- 10. Examples on how to Configure LyoPro Using LyoStopper or Various LoggerClips
- 11. Firmware Update
- 12. Ellab Service Contract
- 13. Technical Specifications
- 14. FAQ
- 15. Changelog
TrackSense
®
LyoPro Version 3.3 Page 10 of 53
User Manual User Manual TrackSense LyoPro – MAN 7
3.1.1. LyoPro Reader Station
• Contains 10 logger positions
• Connected to PC via USB or LAN (ethernet)
• Only 1 LyoPro reader station can be used at a time
3.2. Communication Setup – Hardware Settings
All TrackSense LyoPro 10-slot Reader Stations can be connected to PC via USB or
LAN (ethernet).
3.2.1. USB connection
• Connect the USB cable to the reader station and PC (USB 3.0 is
required)
• Connect the 5V DC power supply to the reader station (option)
• When connecting the 10-slot reader station, the generic driver is
automatically detected and installed.