User's Manual

TrackSense
®
LyoPro Version 3.3 Page 13 of 53
User Manual User Manual TrackSense LyoPro – MAN 7
Operating Temperature 5 to 50 °C
Environmental:
0 – 90% RH, non-condensing
Operating Voltage
5V DC External Adapter 100-240V AC, 50-60 Hz
or USB
Weight:
792 grams
Dimensions (H x W x L) :
34.5 x 160 x 118 mm
Material:
Aluminum
3.3.2. Access Point: Sensitivity to ESD
The Access Point system is sensitive to Electrostatic Discharge (ESD) when the
antenna connector is open. The following techniques should be used to help
reducing the risk of component damage caused by static electricity.
1. Before handling any antenna / Access Point, immediately drain any
electrostatic charge on your body by touching a grounded object.
Alternatively, obtain and wear a commercially available wrist strap
device, which should be removed for potential shock reasons prior
to applying power to the unit
2. The antenna should only be removed/connected when the Access
Point is powered off and no other cables are connected to the Access
Point
3. Never touch the center pin in the open antenna connector
4. Leaving the antenna attached to the Access Point, even during
transportation, helps avoiding damage to the connector and is
therefore highly recommended