User's Manual
Table Of Contents
- 1. Safety Information
- 2. New Order Contents
- 3. TrackSense® LyoPro 10-slot Reader Station
- 4. Activating ValSuite®
- 5. How to Start Logging Data with TrackSense LyoPro
- 6. TrackSense® LyoPro Loggers
- 6.1. TrackSense® LyoPro
- 6.1.1. Data Logger Specifications
- 6.1.2. Proper Use
- 6.1.3. Data Logger Serial Numbers
- 6.1.4. Disassembling / Assembling Data Loggers
- 6.1.5. Procedure for Cleaning TrackSense® LyoPro Data Loggers
- 6.1.6. Procedure for Changing the Data Logger O-Ring
- 6.1.7. Extended Warranty
- 6.1.8. Thermocouple Sensor
- 6.1.9. -30 to -80 C Application Recommendations
- 6.1. TrackSense® LyoPro
- 7. Battery
- 8. Calibration
- 9. Accessories
- 10. Examples on how to Configure LyoPro with Appropriate Accessories
- 11. Firmware Update
- 12. Ellab Service Contract
- 13. Technical Specifications
- 14. FAQ
- 15. Changelog
TrackSense
®
LyoPro Version BETA Page 10 of 46
User Manual User Manual TrackSense LyoPro – MAN 7
3.1.1. Master Reader Station
• Contains 10 logger positions
• Connected to PC via USB or LAN (ethernet)
• Only 1 master reader station can be used at a time
3.2. Communication Setup
All TrackSense LyoPro 10-slot Reader Stations can be connected to PC via USB or
LAN (ethernet).
3.2.1. USB connection
• Connect the USB cable to the reader station and PC (USB 3.0 is
required)
• Connect the 5 VAC power supply to the reader station (option)
• When connecting the 10-slot reader station, the generic driver is
automatically detected and installed.