Datasheet

Rotary Switches
30
www.elma.com
Type Key
Orientation/Mounting
V - THT vertical
C - THT horizontal
S - SMT vertical
Bushing
T -
Threaded M7 x 0.75 x 6 mm
(nut supplied, packed separately)
N - Non-threaded Ø 7 x 6 mm
Push Button
6 - 6 N
3 - 3 N
0 - Without push button
Resolution, Torque
1
1 - 32 detents (16 PPR) 2.0 Ncm
2 - 16 detents ( 8 PPR) 1.5 Ncm
3 - 16 detents ( 8 PPR) 2.5 Ncm
4 - 32 detents ( 8 PPR) 2.0 Ncm
5 - 16 detents (16 PPR) 1.5 Ncm
6 - 16 detents (16 PPR) 2.5 Ncm
8 - No detents (16 PPR)
9 - No detents ( 8 PPR)
A - 32 detents (16 PPR) 0.5 Ncm
B - 32 detents (16 PPR) 1.0 Ncm
2
IP Sealing
0 - IP60
1 - IP68
1
shaft sealing
2 - IP68
1
shaft/front panel sealing
(non-threaded bushing gasket provides IP65,
O-ring/gasket is mounted)
Shaft Separation
M - Mounted
S - Separated (snap-in shaft mechanism)
N - No shaft
Shaft Type
00 No shaft
01
03
0H
10
11
12
13
20
2
30
31
40
43
45
51
2
Other shafts are available on request.
2
Threaded bushing: Shaft to be ordered separated; shaft
mounting after encoder assembly to front panel
(nut does no fit over ¼" shaft diameter).
1
O-ring of IP65/IP68 shaft sealing may slightly
increase switching torque.
2
Available with non-threaded bushing only.
1
O-ring of IP65/IP68 shaft sealing may slightly
increase switching torque.
E 3 3 - X X X X X - X XX X
Stainless steel,
low play
Stainless steel,
low play
Stainless steel,
low play
Basic type
O-Ring Mounting Tool
Order number:
j
Slip the lubricated O-ring over the bushing.
k Slide the mounting tool over the bushing.
l While pushing down the O-ring, rotate the
mounting tool simultaneously.
j
k
l
Incremental Encoder Type E33
E33-ORING-TOOL
Packaging
T - Tray
(THT or SMT, 10 or 50 pcs. tray size,
depending on shipping qty.)
R - Tape & reel with vacuum plug
(SMT only, 200 pcs. per reel, shafts separated)