Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Operating instructions elmeg CS410 / CS410-U 1 G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp Mittwoch, 11.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm 2 G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp Mittwoch, 11.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Table of contents Description and Installation . . . . . . . . . . . . . . . . . . 1 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking and placing the telephone . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting the telephone (ISDN and handset cords) . . . . . . . . . . . . . . . . . . 4 Connecting an configuring a headset (not included) . . . . . . . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Enquiry Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Call transfer (switching) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Broker’s call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Three-party conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Telephone operation . . . . . . . . . . . . . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Setting the volume of the »Station guarding« tone . . . . . . . . . . . . . . . . . . . 63 Call waiting tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Setting the headset type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Volume setting for appointment reminders . . . . . . . . . . . . . . . . . . . . . . 64 Possible audio output features . . . . . . . . . . . . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Contents of the WIN-Tools CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . 86 Installing the programs from CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . 87 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Declaration of conformity and CE mark . . . . . . . . . . . . . . . . . . . . . . . . 89 Default telephone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Description and Installation You can connect the ISDN system telephone at the internal ISDN connection of an elmeg pabx system (S0 or Up0). The ISDN telephone is connected to the ISDN network through an ISDN jack (Western or RJ.45). The ISDN telephone provides system features when connected to certain elmeg PABX systems.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm For example: Separate programming for each MSN extension number, time control feature for voice announcement related to specific MSN extension numbers, automatic message forwarding with newly recorded calls, recording of dictations, logging of calls, remote polling protected by PIN A special key and LED are provided for operation of the answering machine.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Elektrostatic charges The telephone is supplied with enhanced ESD protection against the effects of electrostatic discharge that exceeds the protection level cited in the approval specification. Elevated ESD levels should nevertheless be avoided to the greatest possible extent. In some cases, electrostatic discharge levels can far exceed the approval limits or the resistance levels already implemented in your telephones.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Connecting the telephone (ISDN and handset cords) Please connect the ISDN cable and the handset cable. Otherwise you will not be able to operate the phone. 3 2 6 4 6 5 5 4 1 7 4 Figure 1 Connecting the handset connecting cord Connect the handset cord (1) as shown in figure 1. Lay the handset cord in the cord groove (4) and lock it below the two cord retainers (5).
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Important notes for connecting the telephone to the Up0 • You can connect a further ISDN device with an S0 port (for example an ISDN card or a another telephone) at the S0 socket (3) of the telephone. For each additional ISDN device this connection provides a power of 1 watt.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm lied with the system to the bottom of your telephone (7). Then, route the headset cord under the cord holder. Headset socket assignments 8 - DSHG-transmitter 8 7 - V+ (3.3V) 7 6 - Microphone - (Ground) 6 5 5 - Handset (3.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Installation of a device driver is started automatically when initially connecting the telephone to a PC. Insert the WIN-Tools CD-ROM supplied with the telephone and follow the instructions displayed on the screen. You will need a hub (USB distributor) if you plan to use several USB terminal devices at your PC. Connect the hub to the USB port of the PC.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Pictographs The pictographs (symbols) described as follows have been used in these operating instructions to illustrate some procedures for setting and using the telephone. b a l g d q t Lift up the handset or start initializing selection. Replace handset. The telephone is idle. A call is signaled. The ringing tone melody sounds. You are conducting a call. A three-party conference call is initiated.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Telephone display and buttons 1 2 3 4 5 12 13 6 7 8 9 10 11 14 15 16 17 18 19 20 21 Figure 5 1 Speaker 2 Handset with connecting cord 3 Answering machine button on the telephone (optional module) 4 6 Softkeys 5 Seven-line backlit display 6 Menu key: This key opens the programming menu.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm 11 C key: Press this button to move back one menu step in the menu. If you are currently in the input mode, this button can be used to delete individual characters.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Special feature for displaying lists in the display Several entries are shown in the display as a list for certain settings or when using the phone. These lists are required for telephone directory or VIP memory programmings for example. <> The active entry (the one you have selected) is highlighted. Use the menu or the OK button to display further features or select the highlighted entry.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Key * # Press 1 2 3 4 5 6 7 * # 0 Several special characters are assigned to the button »0«. For special characters, press the 0 key. For exampe.: »!«, »&«, »?«, »+«, »-«, »=«, »(«, »)«, »@«, »$«, ... Input mode for entering letters You have various possibilities for entering letters. The currently set input mode is displayed on the top half of the display on the right-hand side (no display, »Abc« or »ABC«).
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Acknowledegement signals Entries or settings you make at your telephone are sometimes confirmed by acknowledgement signals. Positive acknowledgement signal (1 long tone): The positive acknowledgement signal indicates that your input has been accepted and stored by the telephone. Negative acknowledgement signal.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Making Calls Starting a call Dial number - no correction possible b t g Dial number Dial number - correction possible a t b g Dial number To change the number or to correct a wrong entry, select the wrong figure with the arrow buttons and press C key to delete it. Now enter the correct number. If you wish to conduct the call using the handset, just lift it up after dialing the number.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm a R s O t Tel. drctry <> O b g Select entry Enter first letter Dialing from the phone’s directory You can store up to 250 names and numbers in the telephone directory. To select a name, you can page through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the push-button set. s a O t Tel.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Dialing from the caller/memo list The phone has a combined caller and memo list. A maximum of 30 entries (calls, memos SMS messages or UUS1- messages) are stored in this list. Entries in the caller or memo list are indicated by the »Caller list« softkey. a s b Caller list g Select entry For more information about the caller/memo list, please refer to page 33 of these operating instructions.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Calling line identification (anonymus call) restriction You can block the display of your telephone number at your caller’s telephone if desired. You can set this function specifically for the next call, or permanently (see page 48). Suppressing calling line identification for the next call During an external or internal call, you can prevent the number from being transmitted (displayed) to the party you have called.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Extended redialing In the extended redialing the numbers of the last 20 calls, connections (conversations) and text messages are stored. You can view these by pressing the redial button or the arrow buttons and subsequently have them redialed automatically. a W W O b g Select entry The last dialed number is displayed. At the end of the second line the status of this entry is indicated by the letters displayed there.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm In the redialing function the name displays instead of the number. ˆˆ 5/Dean v ˆ ˆ memo? Tel. drctry ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Automatic redialing If you placed a call to a subscriber whose number is busy or who does not answer, you can then activate automatic redialing which will call that same subscriber again after about 10 seconds. a W t g Dial number Subscriber busy s or a Autom.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Microphone activation/deactivation, open listening and hands-free calling Activating/ muting the microphone The mute function allows you to switch off the handset microphone during a normal call, or the telephone microphone during hands free calling. The party you are calling will then no longer be able to hear the conversation you conduct with persons in the room (room enquiry).
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Headset use You can connect a headset to your telephone. Connect and configure the headset as described on page 5. You can use the handset or the headset for making calls. Activating and deactivating the headset For headset operation, one of the functions buttons must be configured as a headset key. The LED assigned to this key indicates, whether the headset in switched on or off (LED on or off).
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Messages can also be received even if the »Station guarding« function is active when the »Enabling messages« function key has been programmed and is activated. You can initiate a message using the procedure described in the following, or using a programmed function key. You can also initiate a message during an ongoing call (inquiry call) using the corresponding function key.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Intercom calls can also be received even if the »Station guarding« function is active when the »Enable intercom calls« function key has been programmed and is activated. You can initiate intercom calls using the following procedure, or using a programmed function key. You can only utilize this function if the intercom feature for system telephones has been enabled in the pabx for your MSN extension number.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Programming completion of call to busy subscriber b t g s Dial number Subscriber busy or does not answer Clbckbusy a The »Clbckbusy« softkey is only displayed, when automatic completion of calls are possible with the exchange office or with the pabx. The features »Completion of call to busy subscriber« or »Completion of call on no answer« must be applied for at your service provider for external call-backs.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm If you park two calls on an ISDN bus this bus is then disabled for further calls. “Unparking” is possible only on the bus on which the call was also parked. Parking is only possible when only one connection is currently active with your telephone.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Keypad and tone frequency dialing (dtmf dialing) During an ongoing call you can take advantage of other features using keypad sequences or DTMF dialing. In the telephone configuration program you can set whether keypad sequences or DTMF dialing is to be possible in the initial status of the telephone. The display indicates which other functions (keypad or dtmf) are possible. »Keypad« softkey is displayed.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Conducting calls with several parties Call waiting If, during an ongoing call, a second call comes in for you, the second call is signaled when “Call waiting on” is set (see page 67). s waiting call (250 subscribers 2) g g accept Call with subscriber 1 Call with subscriber 2; Party 1 is put on hold You can take a waiting caller, reject the call, or switch to a different subscriber.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Please note that this feature (ECT - Explicit Call Transfer) must be supported by the PABX system when transferring two (2) external calls, or, when you use your phone directly on the network termination unit, of your network service provider. Broker’s call If you have more than one connection active at your telephone (call waiting or enquiry call) (max.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Telephone operation Telephone directory You can store up to 250 names and numbers in the telephone directory. To select a name, you can page through the directory using the arrow buttons, or enter the specific first letter(s) of the name using the push-button set.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm • you select an entry in the telephone directory with the OK key during call preparation. • you press the softkey »Info« when a call is signalled. • you press the softkey »Display« during a connection. The info text length is restricted to 42 characters. The assignments for the keypad for entering letters, digits and special characters are described on page 11.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Deleting a telephone book entry Begin as follows: a M s s s Program nos. Tel. drctry delete t O <> O Enter first letter Select entry Programming a special dial (VIP tone) tone for a telephone book entry Begin as follows: a M s s s Program nos. Tel. drctry Sp.ton. call <> O Press the arrow buttons to select the ringing tone melody. Confirm your entry by pressing ok.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm VIP Memory You can program VIP numbers for each of the ten buttons 1 … 0 including a name (20 characters max. ) and a telephone number (26 digits max.). Making an entry into the VIP memory Begin as follows: a M s s s <> Program nos. VIP New Select VIP destination t O Enter the name of the VIP target. In this example: »Dean«. Confirm your entry by pressing OK. t O Insert a number. In this example: »012345«.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Caller and memo list The phone has a combined caller and memo list. A maximum of 30 entries (calls, memos SMS messages or UUS1- messages) are stored in this list. Entries in the caller or memo list are indicated by the softkey »Caller list«. You always have the most current entries in the list. The most recent entry is displayed first.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Viewing the caller list a The telephone is idle. The softkey »Caller list« in the lower row of the display indicates that an entry is present in the list. Press this softkey. s The bottom lines show the entries available in the caller list. The active entry (the one you have selected with the arrow buttons) is highlighted. ˆUUS:2 08:30 } ˆ ˆTel.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm <> C The display now shows information about the call. If not all information fit into the screen, use the arrow keys to display more. Press the C-button to leave the menu. You can then use any one of the other options. ˆ 1/Miller office ˆ0123456789 ˆto MSN-1 ˆ(& MSN-2) ˆcall today 07:21 ˆ( 2 x call) »delete?« »Info« The entry is removed immediately. Viewing further information about the call.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Deleting the caller / memo list Deleting an entry s <> Caller list Select the entry you wish to delete a M s delete? Deleting all calls You can delete all entries of the caller / memo list simultaneously. Text messages you have received (SMS / UUS1) will not be deleted.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm t O Enter the number you wish to store as a memo. In this example: »0123456«. Confirm your entry by pressing OK. ˆMemo number create ˆ>0123456_ ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ SMS and UUS1 text messages With this phone you can send and receive SMS or UUS1 messages (SMS - Short Message Service, UUS1 - User to User Signalling). You can input a text message using the keypad on the phone.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Note that all terminal devices that are used (telephones, pabx systems) must support the feature »UUS1 (User to User Signaling)«. The telephone stores all UUS1 messages you have received or sent in two separate lists. Up to 10 received an 10 sent UUS1 messages can be stored. Please not that free storage space must be available to receive UUS1 text messages. You cannot receive more than 10 UUS1 text messages.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm s Finally, you can store the text message in the appropriate list (»ok« softkey) or keep it in the temporary memory (»No« softkey). ˆ Save message? ˆNo ok ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Important notes for entering numbers with SMS transmission If the »Direct exchange line access« feature is switched off for your telephone, then you must enter the line access digit before the target number.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm O Press the arrow keys to view the entire text messages. Press OK to access the next menu with further options. In the upper row of the display you see the date and the time, when you received the message. To select an action, press the corresponding softkey. ˆ* UUS 01/03 † MSN-1 ˆ2200················· ˆI'LL PROBABLY BE 30 ˆMINUTES ˆLATE.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm »send« Editing and then sending the text message. To send the text message, please proceed as described for »Creating and sending text messages« (see page 38). Deleting a text message. »delete?« Automatic sending of text messages (only UUS1) You can send a UUS1 text message automatically to a caller. For this, message 1 in the list of permanently stored messages is used.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Error when sending or receiving an SMS Error while sending an SMS A corresponding error code is displayed in the event that for some unseen reason it is not possible to transmit an SMS. Contact the SMS Service center of your network service provider / carrier to find out which error codes are displayed.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Setting up cost monitoring You have the option of logging the accrued communication costs for your telephone. You must apply for this feature to your network service provider. Ask your service provider on the possibilities of charge data transmission. Please note that transfer of all cost information from the exchange office to your telephone may not always be possible for technical reasons.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Viewing and deleting total costs Begin as follows: > a s s Charge Total ˆTotal: } 1.55 GBP ˆLast conn. Total ˆdelete? ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ You can view the sum of the charges accrued for all MSN extension numbers. To delete them, press the »delete?« softkey.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm for entering letters, digits and special characters are described on page 11. All charge data stored in the telephone are deleted. Recognition and saving of the procedure that is used for transfer of cost information (see page 43) is then re-activated. »delete?« Programming a charge limitation for a specific extension number You can set up a charge account for each number (MSN) that has been entered in the telephone.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm message is shown in the display »Inhibit.:MSN«. Enabling or inhibiting of a number for outgoing calls is protected by an MSN-specific PIN. You must enter this PIN in advance during configuration of the number (MSN). After that, you can inhibit or enable dialing of external numbers (outgoing calls) for this MSN.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Displaying information during a call The displays during calls described as follows depend on your individual settings and can therefore be different for each connection. Correct charge display is shown only if you have applied at your network service provider for transmission of charges during calls.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm ges. »Never«:The charges are displayed during a call. The duration of a call is not displayed. »for Charge«: Charge data, if available, are displayed. If no charge data are available, the duration is displayed instead. Display of information after completion of a call Information about a call can be shown in the display when that call is completed.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm System telephony The system telephone is designed for being connected to the internal ISDN connection of specific elmeg pabx systems. When operated at these pabx systems, your telephone offers you a variety of typical features. For example: • Dialing from the telephone directory of the PABX (see page 14). • Message and Intercom (see page 21, 22 ). • Special function keys (see page 49).
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Extension key You can configure dialing to an internal extension using an extension key. When the corresponding key is pressed hands-free calling is activated and the listed subscriber called. If a call for the listed subscriber is signaled you can accept the call by pressing the extension key. Team keys A team key is a normal line key to which the internal number for a team is assigned.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm on key can be programmed. Deactivation of direct calls is carried out as described in the section »Direct call« (see page 69). Headset on/off If you have a headset connected to your telephone and ready configured, you can operate it by means of a function key. Press the headset key to initiate, accept or end a call.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm LED functions Function key / LED Line key Extension key Team key lit Trunk bundle button Extension key for the answering machine flashes Connection flickers Connection on hold Incoming call no B-channel available AM holds active connection with caller Connection with AM/ Voice Box Incoming answering machine call New messages available Voice Mail key Function key / LED lit not lit MSN assignment connection establishe
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Programming a function key Programming of the function keys is effected during configuration of the system telephone with the PC. You can program the five function keys on two levels with different functions. Using the function key Press the corresponding function key. The function assigned to this key is executed. An LED associated with this particular function is switched on or off accordingly.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm System menu for pabx systems with system telephony capability The system telephone is designed for being connected to the internal ISDN connection of specific elmeg pabx systems. These devices provide a special menu with further system-specific functions. This menu and the features that it contains are managed entirely in the PABX. Accessing the system menu for PABX systems > The telephone is idle. Press the right arrow key.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Configuration settings Telephone numbers (MSN extension numbers) Up to 10 MSN (extension numbers) can be configured on your telephone. When you enter an MSN or extension number in your ISDN system telephone you are essentially defining that your ISDN system telephone is called using this MSN or extension number when a call is made.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm In the initial setting of the telephone, 10 different melodies are stored for call signaling. These 10 melodies can not be changed. You can import a further 10 melodies into your phone via a PC. Using the Sound Manager supplied with the WIN-Tools CD-ROM, you can produce your own tunes on the PC and then load these into the telephone. These melodies are then stored in your phone as Melody 11 … 20.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Programming a default call forwarding number If you do not wish to accept a call, you can forward this call directly to a different phone number (see page 16). If you frequently forward calls to the same number, you can use this number as a default setting in your phone. If you then wish to forward a call, the default number will be presented first for you to use.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Begin as follows: a M s s t Configuration inhibit Enter PIN (defaut settings 0000) O s PIN In this menu you are able to configure your individual PIN (0000... 9999). Please write down the entered PIN. If you forget your PIN, you will not be able to access any of the PIN-protected settings. In this case please ask your specialized dealer or distributor. t O Enter the new PIN. In this example: »1234«.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Begin as follows: a M s t Configuration Enter PIN O Configuration of the requested features is possible Parking code (default setting) A parking code of 55 is set in the initial state. You can change the default park code to a single- or double-digit code. Begin as follows: a t O M s s Configuration Call-Parking The initially set park code is displayed: »55«.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm However, sending and receiving SMS messages is only possible, when this phone is connected to specific elmeg pabx systems. Please refer to the operating instructions for your PABX to determine whether SMS-features are provided with this particular telephone. To send or receive SMS messages with this telephone, the number for the SMS service provider must be stored in the telephone.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Volume settings Speaker volume setting Permanent volume setting Begin as follows: a M <> O s s Acoustic Speaker Use the arrow buttons to set the volume. The bar in the display indicates the current status. Confirm your entry by pressing OK. ˆ ˆ Loudspeaker loudness {} ˆ - ©©©---- + ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Temporary volume setting bg The telephone is idle or you wish to change the speaker volume during an ongoing call.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm <> O Use the arrow buttons to set the volume. The bar in the display indicates the current status. Confirm your entry by pressing OK. ˆ Handset loudness {} ˆ - ©©-- + ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Temporary volume setting bg You lift the handset or you are conducting a call. M <> E Press the menu button. Use the arrow buttons to set the volume of the handset. The bar in the display indicates the current status.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Setting the volume of the »Station guarding« tone You have various options of setting your telephone to »Station guarding« (see page 42). You can set your telephone to signal incoming calls by a brief acoustic signal while »Station guarding« is active. The volume of that idle tone is adjustable. Begin as follows: a M <> O s s Acoustic Quiet Use the arrow buttons to set the volume.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Setting the headset type If a special support feature is stored in your telephone for the headset your are using, set your phone for that headset model. For example, the LED in the microphone extension for »Firefly F142 N« from Plantronics can be activated by the telephone. Begin as follows: a M s s Acoustic Headset A check mark displayed next to the individual softkeys indicates the current status.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Possible audio output features The telephone is equipped with an audio output (Audio-Out socket). Several acoustic telephone functions can be used in parallel with the local speaker via this output. You can also connect external speakers, for example, to allow a message to be heard in the entire office.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Further settings Call forwarding (call rerouting) With this telephone you can be reached, even if you are not in the vicinity of your phone. This is achieved by the system automatically forwarding calls to another internal or external number. Call rerouting can be configured separately for any of the entered numbers (MSN). To utilize the call rerouting function you must have already configured at least one phone number.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm O Confirm your entry by pressing OK. Call rerouting has been registered. The three dots at the right lower corner flash alternately. ˆ Call forwarding direct ˆMSN-1}0123456789 ... ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ Viewing current call forwarding When the telephone is idle, a »U« on the second line indicates that call forwarding has been activated.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm set the volume of the call waiting signal and select whether a waiting call is to be signaled only one time, or several times (see page 63). When »Station guarding« is set, the call is indicated as described on page 62. If you are using the hands-free option for an active connection, waiting calls will only be signaled optically in the display.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Programming a direct call number Begin as follows: a t O M s s s Setting Direct cal MSN ext. Insert a number. In this example: »098765«. Confirm your entry by pressing OK. ˆ Dir. call-in number ˆDirect cal>098765_ ¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬ If you are using your telephone with a PABX system, first enter the line access digit of your PABX before entering the direct dialing number.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Appointment reminders You have the option of setting three different dates with your telephone. • The set appointment is signaled daily . • The set appointment is signaled once. • The set appointment is signaled weekly at the set time (date and time). Once the date and time of the set appointment are reached, an acoustic (with fixed tune and volume) and optical signal is issued.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Deactivating an appointment reminder a M s s <> Setting Date Select appointment O s Off Setting the display contrast You can set individual contrast levels. Begin as follows: a M <> O s s Setting Contrast Use the arrow buttons to set the contrast. Confirm your entry by pressing OK.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Automatic headset use active: The call is taken via the headset when you press an extension or line key with automatic accepting of calls activated. Automatic headset use not active: The call is taken via the open listening / hands-free calling functions when you press an extension or line key with automatic accepting of calls activated.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm The following example describes how to enter a new filter number. Begin as follows: a M s > Setting t O s s <> O s Filter New Select filter number New Enter the filter number. In this example: »012345«. Confirm your entry by pressing OK.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Extended configuration For a full configuration the following options are available: • PC-configuration of the telephone via the USB port • PC-configuration of the telephone via the internal ISDN connection of an elmeg pabx (firmware version 5.40 or later, CD version 5.43 or later, WIN-Tools Telephones from Version 3.30). • Extended configuration right at the telephone (may possibly have to be enabled by entering a specific code.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Connected to a pabx Begin as follows: a M s > Configuration s ˆ PABX ˆType-ID PABX External line ˆNumb. length Ln.access • PABX system type (»Type-ID« softkey) Type 0: The PABX system does not transmit the line access digit on incoming calls. The line access digit must be entered in the phone. Type 1: The PABX system transmits a line access digit on incoming calls. No line access digit should be entered in the phone.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm an entry in the enable list is longer than an entry in the inhibit list that entry can be dialed.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Function Call filter Display »call filter« Further entries Call forwarding »call forwarding« Direct call Headset »Dir. call-in« »Headset« Auto-Answer »Auto. Accept on/off« User key »User on/off« Index of numbers (MSN-1…MSN-9), Call forwarding mode (1 - fixed, 2 - delayed, 3 - when busy) and Call forwarding target. Telephone number index (MSN1 … MSN-9) for which calls are automatically answered.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm »n« Dummy number. If a number is entered prior to execution of a macro (or for example, dialed from the telephone) this number is used in place of the dummy number in the macro. »P« Pause (1 second) in the command sequence (between two characters/commands) »RE« Re-establish the phone’s idle state. If there is an active connection at this phone, execution of this macro is canceled at this point.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Key 9 0 * # Press 1 9 0 * # 2 3 4 5 6 7 Macro programming examples: Function Key programmed for a particular number (for example: 012345 and activate LED for two seconds) Setting an appointment Reading new text messages (UUS1) Inhibiting the phone for all outbound calls »N«: Password for the telephone (Key for level 1, activate LED) Re-enabling the telephone for outbound calls »N«: Password for the telephone (key for level
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Service functions Reading the telephone’s firmware version You can have the version and the model of your phone displayed so that you can determine, for example, which firmware version is available in your phone. Begin as follows: a C M s s t Configuration Service Telephone PIN The display shows information about your telephone. For example:Firmware version, name, … Press the C button to exit the menu.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm s Press the arrow keys to view the countries, for which specific settings are available. Press the softkey for the desired country. For example: »English«. All country-specific settings take effect immediately. The telephone data will not be deleted. ˆWhich Country? } ˆItaliano Español ˆDeutsch ˜ English ˆFrançaise Nederland ˆ29.05.03 07:41 } ˆTel.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Important notice for export variants: Please ask your specialized dealer/distributor for the access number of the download server for your country! Download server Number elmeg server ++49-(0)5171-901190 Initiating download of new firmware on the phone: Begin as follows: a M s s t Configuration Service Telephone PIN O s s Software ok The telephone then restarts from the BIOS. s Press the »Update« softkey.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Telephone BIOS This telephone is equipped with a BIOS (basic functions) in English. The BIOS functions also remain available even if the firmware of the telephone does not operate properly, or if new firmware was not loaded completely (e. g. if the PC crashed while loading the firmware). The following functions are available in the telephone’s BIOS • All phone calls are signaled. No number (MSN) has been entered in the telephone.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Reset - Resetting to default state You can reset the telephone to its initial state using the procedure described as follows. All of the data that you have entered previously will be deleted. If you have connected the elmeg T400 key extension module to your phone all of the data for the module will also be deleted when this procedure is executed.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Telephone and PC CTI / TAPI using the telephone’s USB port The abbreviations CTI and TAPI denote the standard interface for Windows telephony applications from Microsoft. Telephones and computers can work hand in hand via this interface.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm following drivers must be installed: USB and CAPI drivers of the telephone NDISWAN driver (only necessary when using the Windows Dial-up Networking) Audio applications using the telephone’s audio sockets The telephone is equipped with an input (2) and an output (3) for audio signals. Both these ports have a 3.5 mm stereo socket.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Application programs • Adobe Acrobat Reader Program for viewing and printing PDF documents. Drivers • CAPI driver (Common ISDN Application Programming Interface) Links the telephone to programs that provide data communication functions.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm • Windows 98SE / ME / 2000 / XP operating system • Min. 80 MB free hard disk space for installation Installation sequence • Start your PC. • Insert the CD ROM supplied with the system in the CD ROM drive of your PC. • Wait a moment until the program starts automatically. If the autostart option is not activated in your PC, you can start the file »setup.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Appendix Declaration of conformity and CE mark This device meets the requirements of the following EC directive R&TTE 1999/5/EG: 1}»Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity« You can also request this EC declaration of conformity at the following Internet URL: http://www.elmeg.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm • No output of audio signals over the Audio-Out port. • Numbers are identified with incoming and outgoing connections (CLIP / COLP). • Telephone number and costs are displayed. The call duration is shown when no cost • • • • • • • • • • • • • • • • • data are available. Display of information after completion of a call (e.g. duration) Cost data: Tariff 0.062 and currency EUR Call waiting is switched off.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Telephone menus »Configuration« menu M »Configuration« Configuration inhibit } MSN Display Charge Call-Parking Service Standard call-parking Program dial number } Call-Parking>55 MSN-1 MSN-3 MSN-4 MSN-2 MSN-5 Display-Monitoring Program dial number{ MSN-8 MSN ext. MSN-6 Conversation Language MSN-9 MSN-7 MSN-10 Enter PIN Example: MSN-6 Config.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm »Acoustic« menu M »Acoustic« Volume, etc. } Headset Ack. tones Speaker Quiet Call wait. handset Call wait. tone repeat ˜ Message Date Intercom Audio Out {} Message ˜ Hands-free calling ˜ Signaling tones Speaker function Appt.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm »Setting« menu M »Settings« Setting Direct cal } Setting Headset { Contrast Call rerout. Date Time AUTO accept Filter Call wait. Call waiting enable? Call filter OK, extended No ˜ Incoming ok New call forwarding Use headset? Off No Fixed ok delayed busy Display-Contrast Call forwarding delay {} MSN-3 - ©©©©----- + MSN-1 MSN-4 MSN-2 MSN-5 Activate direct call? No ok MSN ext.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm »Program nos.« menu M »Program nos.« Program dial number Tel. drctry VIP telephone book 237 Entries avail. Sp.ton.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Technical specifications Dimensions L x W x B: Weight: Temperature range Operating: Storage: approx. 255 x 180 x 100 mm approx. 0.8 Kg +5° C … +40° C -25° C … +70° C ISDN connection (CS410) Length of ISDN connection cord: ISDN connection: Channel structure: ISDN power consumption: approx.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm 96 Appendix 102 G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp Mittwoch, 11.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Index A Accepting a call . . . . . . . . . . . . 16 Acknowledgement signals . . . . . . . 13 setting . . . . . . . . . . . . . . . 62 Activating/deactivating the headset . . 51 Adding telephone book entries . . . . . 30 Additional keypad . . . . . . . . . . . . 2 Adobe Acrobat Reader. . . . . . . . . 87 Anonymus call . . . . . . . . . . . . . 17 Answering a call, automatic . . . . . . 71 Answering machine (AM) . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Connecting the telephone to the S0 . . . 4 Connecting the telephone to the Up0 . . 4 Controlling costs charge limitation . . . . . . . . . . 45 inhibiting an extension number for outgoing calls . . . . . . . . . . . 45 Country-specific settings. . . . . . . . 80 CTI using the USB port . . . . . . . . . 85 D Daily appointment . . . . . . . . . . . 70 Data, technical . . . . . . . . . . . . . 95 Day / night modes . . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm team key . . . . trunk bundle key user on/off . . . voice mail key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 49 51 51 H Hands Free Calling . . . . . . . . . . . 20 Headset . . . . . . . . . . . . . . . 5,21 automatic use . . . . . . . . . . . 71 connecting . . . . . . . . . . . . . 5 settings . . . . . . . . . . . . . . . 6 socket assignments . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm P PABX function keys . . . . . . . . . . . . 49 system menu. . . . . . . . . . . . 54 Parking a call. . . . . . . . . . . . . . 24 PC requirements . . . . . . . . . . . . 87 Pictographs . . . . . . . . . . . . . . . 8 PIN for an extension number . . . . . . 57 PIN protection for telephone menus . . 58 Placing the telephone . . . . . . . . . . 3 Pocket money account. . . . . . . . . 45 Positive acknowledgement. . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm without calling line identification (CLIR) . . . . . . . . . . . . . . Station guarding . . . . . . . . . . . Suppressing calling line identification . for the next call . . . . . . . . . . Switching a call . . . . . . . . . . . Switching call modes. . . . . . . . . System menu of pabx systems . . . . . . . . . . . 17 42 48 17 27 50 54 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm 102 Index 108 G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp Mittwoch, 11.
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Brief description of functions Enquiry Call b g M t g Dial number Broker’s call b g M t > g s Connection1...
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Completion of call to busy subscriber b t g s Dial number Subscriber busy Clbckbusy a Selection of outgoing numbers (MSN) a O t F Dial number s s MSN MSN1... MSN10 b g t O Activate call forwarding a F s Setting s s s Call delayed MSN1... rerout. busy Fi- MSN10 xed Dial number Deactivating call forwarding a F s s s s Setting Call rerout. Off MSN1...
Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm Warranty Declaration Insofar as claims filed for elimination of deficiencies (applicable laws) are being processed, these shall be handled via the contractual partners. In addition, elmeg provides the following manufacturer’s warranty: 1. For this device, the company ELMEG GmbH & Co.
Subject to modifications 5180 039213.8 / 06-2003 / 10x1 Farbprofil: Generic CMYK printer profile - None Komposit Standardbildschirm ELMEG GmbH & Co.KG Kommunikationstechnik Vöhrumer Str. 30 D-31228 Peine http://www.elmeg.de http://www.elmeg.com Operating instructions elmeg CS410 / CS410-U 112 G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp Mittwoch, 11.
