Operating instructions

Displaying information during a call
The displays during calls described as follows depend on your individual settings
and can therefore be different for each connection.
Correct charge display is shown only if you have applied at your network service
provider for transmission of charges during calls.
g
s
During a call, the upper rows of the display
show the number or the name of the other par
-
ty (»TONY«) and the duration of the entire call
(»02.43«).
Press the »display« softkey.
ˆTONY
ˆ02.43 MSN-1
ˆ Memo
ˆdisplay
ˆ Keypad
ˆMic.muted
ˆ Parking
You are then shown other information available
on the current connection.
Date (»29.05.03«), time (»07:41«),
associated number (»0987654321«),
Costs (»0.36 GBP«), duration of the call
(»02.55«)
ˆTONY
ˆto MSN-1
ˆ12.12.02 12:01
ˆ0987654321
ˆ0.36 GBP 02.55
Pressthe arrowkey to display further information (if available).
If you are the destination of call rerouting, you will be shown the number that is
being rerouted(»U{123«), when it is transferred.
You see the normal display again during a con-
nection.
ˆTONY 03.33 }
ˆ03:33
ˆ Memo
ˆdisplay
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
a After finishing the call you see for about 5 se-
conds the following display.
ªªªªªªªªªªªªªªªªªªªªªª
ˆTONY
ˆCosts 0.36 GBP
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Selecting the type of data and charge information displayed during a call
Begin as follows:
a
M s s s s
Configuration Display Conversation
»Conversation«Programming the call data display mode
The following options are available:
»Date+Time«, »Tel. numb. only«, »Tnumb+Time« or
»Tnumb+Charge«.
»Duration« Programming the call duration display mode
The following options for displaying the call duration are available:
»Always«:During a call, the display shows the duration but not the char
-
Use 47
53
G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp
Mittwoch, 11. Juni 2003 15:06:36
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm