Operating instructions

Programming a default call forwarding number
If you do not wish to accept a call, you can forward this call directly to a different phone num
-
ber (see page 16).
If you frequently forward calls to the same number, you can use this number as a default set
-
ting in your phone. If you then wish to forward a call, the default number will be presented first
for you to use.
The default setting for such a number is made separately for each number (MSN) entered in
the telephone.
In the menu »Program MSN-1« press the softkey »transfer«.
t
O
Enter the desired telephone number. To delete
an existing number press the C button.
In this example: »0123456«.
Confirm your entry by pressing OK.
ˆCall forward. number
ˆMSN-1>0123456_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Assigning a specific PIN for an extension number (MSN)
You can assign separate PINs to all of your telephone’s extension numbers (MSN). Using
this PIN, you can enable or inhibit an extension number (MSN) for outbound calls.
In the initial state, all MSN-specific PINs are set to »0000«.
In the »Program MSN-1« menu press the right arrow button and the »PIN« softkey.
t
O
Enter the specific PIN for »MSN-1« (default set-
ting »0000«). If you have forgotten the
MSN-specific PIN, you can access this menu
via the individual PIN for the telephone.
Confirm your entry by pressing OK.
ˆ Input PIN please
ˆ>****_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
t
O
Enter the 4-digit specific PIN for MSN-1.
In this example: »1234«.
Confirm your entry by pressing OK.
ˆ Change PIN
ˆMSN-1>1234_
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
Telephone PIN (password)
Some telephone settings and operations are protected by a PIN (password).
•
Access to the telephone menus (see page 58)
•
Deactivating a direct call (see page 69)
•
Remote polling of the answering machine (optional module)
•
Access to the »Service« menu (see page 80)
Settings 57
63
G:\_elmeg\CS410\V1\uk\mn\uk-410-mn-10x1.vp
Mittwoch, 11. Juni 2003 15:06:40
Farbprofil: Generic CMYK printer profile - None
Komposit Standardbildschirm