User's Manual

14
➍
USING THE PRODUCT
◆ADJUSTING THE FOCUS
Press the AF button to automatically focus on the subject.
◆TURNING THE LED LIGHTING ON/OFF
Press the LED lighting button to turn on the LED lighting.
Press this button again to turn off the LED lighting.
◆SECURING THE PRODUCT
①Using the Desk Clamp (sold separately)
By using the Desk Clamp, you can secure the product to
the installation surface.
For details, refer to the following website.
https://www.elmousa.com
https://www.elmoeurope.com
②Using through holes
By using through holes (φ4.5) of the product,
you can secure the product to the installation
surface such as a desk.
Use a screw with nominal diameter 4. (screw head
diameter: 6mm – 8mm).
Select a screw that is long enough to fix the product
to the installation surface.
※The distance from the screw attachment to the bottom
of the product is 14mm.
※Screws are not included in the product.
③Using a tripod screw
By using a tripod screw hole (1/4-20UNC) in the
bottom of the product, you can secure the product
to the installation surface.
※Screws are not included in the product.
CAUTION
• To take shots of people, turn off the LED lighting.
• Make sure that the light from the LED lighting does not shine directly into your eyes.
• This product is equipped with a high-brightness LED. You can safely use it to light up
the object. The brightness will gradually decrease with long-term use. This is not a
malfunction but a characteristic of the LED.
• Do not touch the LED lighting while it is on as it may become very hot.
through holes
tripod screw holes
Desk Clam
p