Switch Installation Guide

Duo User Guide
MAN-DUOUG (Ver. 1.0)
3-33
3.13 Powering Up
After the cables have been connected to their devices, the Duo is ready to be powered up.
Caution:
Before applying power, ensure that the DC supply is within the specified range and
that the proper plus-minus connections are in order.
3.14 Initializing the System
After the Duo has been connected and mounted, the system must be set up and initialized.
This is accomplished using the Composer, Elmo’s Windows-based software application. Install
the application and then perform setup and initialization according to the directions in the
Composer Software Manual.