User`s guide

www.bissell.com 800.237.7691
5. Attach the flexible hose to the hose adapter
nozzle. Choose the tool appropriate for your
cleaning job and attach to the end of the hose.
Emptying the dirt container
Empty the dirt container after each
use. A full dirt container may reduce
suction or performance of vacuum.
1. Turn hand vacuum OFF (O)
2. Unplug hand vacuum from electrical outlet.
3. Press dirt container release latch down
to disconnect dirt container and filter
assembly from the unit.
4. Remove filter by grasping tabs on both sides
of filter frame and pulling away from the dirt
container. For best results, periodically tap fil-
ter assembly against trash can to remove dirt
that has collected on the screen and filter.
5. Empty dirt into trash can.
6. Replace filter assembly by aligning side
labeled “TOP” into top of dirt container.
Grasp filter tabs and press firmly to ensure
filter assembly is secure in dirt container.
NOTE: Make sure side of filter
assembly labeled "TOP" faces
outward when inserting filter
assembly into dirt container.
7. Reattach dirt container to unit by aligning
bottom of dirt container to bottom of unit.
Pivot upwards and snap into place. Use
one hand to hold the unit and use the other
hand to clip the dirt container securely in
place.Cleaning the filter and screen
Cleaning the filter and screen
1. Turn hand vacuum OFF (O).
2. Unplug hand vacuum from electrical outlet.
3. Press dirt container release latch down to
disconnect dirt container and filter assembly
from the unit.
4. Remove filter by grasping tabs on both sides
of filter frame and pulling away from
the dirt container.
5. Separate filter assembly by grasping tabs
on both sides of assembly and pull. For best
results, periodically tap filter and screen
against trash can to remove dirt that has
collected on the screen and filter.
5
Operations
5.
3.
4.
5.
6.
7.
ATTENTION:
For best performance, dirt
container and filter assembly
should be cleaned after
every use.
4.
5.
5a.
Maintenance and care