Instruction manual

18
SHUTTER AUTO
FILE A
PEDESTAL 00
SYNC INT
AREA LINK:1
W B-OFFSET 00
INIT.
END
PUSH FUNC TO SELECT
SHUTTER
FILE A
PEDESTAL
SYNC
AREA
W B-OFFSET
INIT. NO
END YES
PUSH FUNC TO SELECT
INIT. (Scene File Initialization)
This reset settings of the scene file to the factory
setting.
1
Select a scene file (A or B) to initialize the setting
in FILE.
2
Move the cursor to INIT. using the UP or DOWN
button.
3
Press the FUNC button. The selected scene file
(A or B) is displayed. NO/YES is displayed.
4
Select NO when not initializing. Select YES and
press the FUNC button when initializing.
Factory setting (the following setting if INIT. is executed)
The setting is common to scene files A and B.
END (End of Screen Display)
To finish the menu, move the cursor to END using
the UP or DOWN button and press the FUNC but-
ton. To store the setting in the camera, be sure to
clear the display by END item. When the display is
cleared, the setting is stored in the camera. If the
POWER switch is turned off while the menu is be-
ing displayed, the setting is not stored and the old
data remains.
SHUTTER AUTO
FILE A
PEDESTAL 00
SYNC INT
AREA LINK:1
W B-OFFSET 00
INIT.
END
PUSH FUNC TO SELECT
AUTO
00
EXT.VBS
LINK:1
00
SEP WB 1
SHUTTER 1
H-PHS 50
SC-PHS 0
SC-FINE 50
SHUTTER
PEDESTAL
SYNC
AREA
WB-OFFSET
LEVEL 00
BLC OFF
PEAK:AVE 00:10