Instruction manual

21
OPTIONAL PARTS
TROUBLESHOOTING CHART
Symptom
No picture
Poor color
“HEAD UNCONNECTED”or
“CABLE DETECT ERR” is
displayed on the screen
Items to be checked
• Is the power supplied correctly?
• Is the lens iris adjusted correctly?
• Are the cables connected correctly?
• Is the monitor (TV) adjusted correctly?
• Is the white balance of the camera adjusted correctly?
(in modes other than automatic trace)
• Is the illumination dark?
• Is the SC phase adjusted correctly? (External sync)
• Turn the power of the camera off, make proper connec-
tion for the camera head, camera cable, and camera
control unit, and then turn the power on again. (Im-
proper connection may cause the trouble.)
Camera head
Code #
9742-9
9657
9657-9
9743-9
9744-9
Type
MN43H
QN42H
QN42HL
CN43H
UN43H
φ 17mm Micro camera head
φ 7 mm Super-micro camera head
φ 7 mm Super-micro camera head
C-mount camera head
φ 12 mm Micro camera head
Camera cable (for MN43H, CN43H, UN43H, MN42H and CN42H)
Nominal length
2 m
3 m
5 m
12 m
20 m
30 m
54 m
Diameter
5.0 mm
5.0 mm
5.0 mm
5.0 mm
5.0 mm
5.0 mm
5.0 mm
Code #
9833
9833-1
9833-2
9833-3
9833-4
9833-5
9833-6
Type
EMC-02H
EMC-03H
EMC-05H
EMC-12H
EMC-20H
EMC-30H
EMC-54H
* QN42H camera head is equipped with 3.5 m camera cable.
* QN42HL camera head is equipped with 15 m camera cable.
* EMC-54H cable can be used with MN43H/MN42H/CN43H/CN42H cameras (except
UN43H)
Lenses
A wide variety of optional micro and super-micro lenses are available for MN43H and
QN43H camera heads. Consult with Elmo dealers for details.