Specifications

KP-FD140 • KP-FD202 • KP-FD500
CCD CAMERAS
HITACHI
[phone]• 1-800-947-9901• Quick Dial 821
19
PHOTO - VIDEO - PRO AUDIO
Megapixel Progressive Scan Color Cameras
Designed for use in machine vision applications requiring high performance in a compact
package, the KP-FD140, KP-FD202 and KP-FD500 feature a CameraLink output using the SCL or
PCL type connection. The CameraLink output can be configured to run as a Base or Medium
configuration and can be selected to work at 36, 30 or 2- bit depth.
The KP-FD140 features a1/2” progressive scan CCD with 1.45 million pixels (1392H x 1040V),
the KP-FD202 a1/1.8” 2-megapixel CCD (1628 x 1236), and the KP-FD500 a massive 2/3”
5-megapixel CCD (2456 x 2058)—each combining with a Bayer RGB filter, allowing them to
produce excellent image quality at high resolution, while outputting 30 fps. The KP-FD500
outputs 12 fps. Standard features include ATW or Memory mode for white balance,
adjustable gamma, AES or manual shutter modes, a six vector color corrector, adjustable
color saturation, sharpness and brightness. A frame on-demand mode is provided, allowing
the camera to capture images at a precise timing. A partial scan mode can be selected to allow
for higher frame rates and can be set to start at the top or center of the frame and continue for the selected number of lines.
HV-F31F • HV-F31CL • HV-F22F • HV-F22CL
3-CCD Progressive Scan XGA and SXGA Color Cameras
Incorporating three1/3” 800,000 (1024 x 768) pixel progressive scan CCDs (HV-F31F and HV-31CL) or three 1/2” 1.45 million (1360 x1024) pixel
progressive scan CCDs (HV-F22F and HV-F22CL), these cameras produce excellent image quality with high vertical resolution for use in medical,
microscopy, and other image processing applications. Featuring a 3rd generation DSP, the HV-F22F/CL and HV-F31F/CL incorporate ATW, ASC, AES,
ALC, auto knee, flare correction, 6 vector color correction, and 4 scene files for the setup and storage of all camera operational parameters. The
cameras also feature a long integration mode for use in low light levels, and a frame-on demand mode for use in vision systems. In the frame-on-
demand mode, a strobe signal is output at the end of the trigger pulse. An industry standard 12-pin Hirose connector is used for external sync,
trigger input, and strobe output signals.
KP-FD140SCL(Mfr # KP-FD140SCL • B&H # HIKPFD140SCL)
1.45 Megapixel Progressive Scan Color Camera........................................CALL
KP-FD140PCL
(Mfr # KP-FD140PCL • B&H # HIKPFD140PCL)
Same as above, except with mini PoCL CameraLink Cable...................CALL
KP-FD202SCL
(Mfr # KP-FD1202SCL • B&H # HIKPFD202SCL
2-Megapixel Progressive Scan Color Camera.............................................CALL
KP-FD202PCL
(Mfr # KP-FD202PCL • B&H # HIKPFD202PCL)
Same as above, except with mini PoCL CameraLink Cable...................CALL
KP-FD500SCL
(Mfr # KP-FD500CL • B&H # HIKPFD500SCL)
5-Megapixel Progressive Scan Color Camera.............................................CALL
KP-FD500PCL
(Mfr # KP-FD500PCL • B&H # HIKPFD500PCL)
Same as above, except with mini PoCL CameraLink Cable...................CALL
* PCL versions are powered by mini PoCL
CameraLink cable and there is no 12-pin power connector on the camera
HV-F31F (Mfr # HV-F31F • B&H # HIF31F)
1/3” Progressive Scan Camera with IEEE1394 Interface...........................CALL
HV-F22F
(Mfr # HV-F22F • B&H # HIF22F)
1/2” Progressive Scan Camera with IEEE1394 Interface...........................CALL
HV-F31CL
(Mfr # HV-F31CL • B&H # HIF31CL)
1/3” Progressive Scan Camera with CameraLink Interface .....................CALL
HV-F22CL
(Mfr # HV-F22CL • B&H # HIF22CL)
1/2” Progressive Scan Camera with CameraLink Interface .....................CALL
◆ On the HV-31CL the CameraLink interface allows
easy connection with a frame grabber and allows
the camera to operate at a full 30 fps with full XGA
resolution. On the HV-22CL, the CameraLink
interface allows the camera to operate at 15 fps
with full SXGA resolution. Both output RGB data
at 24 bits per pixel enabling 256 shades of gray
for each channel. They are powered through the
12-pin Hirose connector. Camera control is
handled via the CameraLink interface.
◆ On the HV-31F and HV-22F, their IEEE1394
interface allows easy connection with a
computer permitting resolution in the
XGA/SVGA or SXGA/VGA ranges
(respectively). Their frame rate, bits per
pixel and resolution are related and can
be selected to best meet the imaging
requirements. Power can be input
through the12-pin Hirose or IEEE1394
connector.