Specifications

CCD CAMERAS
PANASONIC
[phone]• 1-800-947-9901• Quick Dial 821
35
AW-RP400
High Performance Pan-Tilt Controller
The AW-RP400 is a high performance controller with professional and easy to
use controls, along with reverse-polarity dual joysticks, providing precise and
extremely accurate access to the AW-PH360 and PH400 pan-tilt heads and full
camera CCU control.
Complementing the PH400 and PH360, the AW-RP400 Pan-Tilt Controller offers
a changeable zoom/focus controller (joystick/seesaw), 50 preset positions per
camera, five pan-tilt heads control, Zoom/Focus/Pan/Tilt speed control, a Tally/
Intercom function, and10 minutes of unique tracing memory. The AW-RP400
offers a SD memory card slot to save settings to a postage stamp-size SD memory
card. It has a maximum control distance of more than1640’ (500 meters), and is also RS-232C controllable.
◆ Changeable zoom/focus controller
(joystick/seesaw).
◆ Joystick with camera roll control and speed
control knobs for pan, tilt, zoom, iris, focus.
◆ 50 pre-set positions.
◆ 5 pan-tilt heads control (by installing an
additional control panel, two of the five
units in the pan/tilt head system can be
controlled at the same time).
◆ Zoom/Focus/Pan/Tilt speed control.
◆ Tally/Intercom function.
◆ 10 minutes tracing memory
(60 seconds x 10 positions).
◆ RS-232C interface.
◆ Maximum control distance of 1640’ or
3,280’ using the AW-IF400 Protocol
Converter.
◆ By connecting the AW-CB400 remote
operation panel to the control panel, the
convertible cameras mounted on the pan/ tilt
heads can be controlled at the same time.
◆ Cross control by two controllers.
◆ +DC12v operation (AW-PS505A AC adapter is
required).
AW-RP400
(Mfr # AWRP400 • B&H # PAAWRP400)..................5099.95
◆ The AW-PH650 outdoor pan-tilt head can be
controlled by the AW-RP400 controller by
using this protocol converter.
◆ By using the AW-IF400 the control distance
between AW-PH400 and the AW-RP400 can be
extended by a maximum distance of 3280’.
PHOTO - VIDEO - PRO AUDIO
AW-IF400 Protocol Converter
The AWIF-400 allows specific controllers to operate various pan and tilt systems from long distances.
For example the AW-PH400 indoor pan-tilt head can be controlled by the AW-RP555 or AW-RP655
controllers using the AWIF-400 protocol converter. Requires AW-PS505A AC Adapter.
AW-IF400
(PAAWIF400)..............................1079.95