Laser Pointer User Manual

- 11 -
0
A
SXGA
Key alignment and functions:
XGA
NTSC
PAL
Over scan
Under scan
Normal operation
Initialization
BC D
1
DIP Switch
The functions can be switched as follows:
[
A
]
key:
To switch the resolution of video output through the RGB-out terminal
[
RGB OUT
]
.
.
SXGA
.
XGA
[
B
]
key: To switch the TV output.
.
NTSC
.
PAL
[
C
]
key: To switch the screen size of the TV output.
.
Over scan
.
Under scan
[
D
]
key: To initialize the setting of the network function to its factory setting.
.
Normal operation
.
Initialization
45.
Name Function
Video-in
Terminal 1
Video signal from this terminal is output through the analogue
RGB-out terminal when the input selection is set at RGB1.
Video-in
Terminal 2
Video signal from this terminal is output through the analogue
RGB-out terminal when the input selection is set at RGB2.
Audio-in
Terminal 1
Audio signal from this terminal is output through the audio-out
terminal when the input selection is set at RGB1.
Audio-in
Terminal 2
Audio signal from this terminal is output through the audio-out
terminal when the input selection is set at RGB2.
P.22, P23
P.22, P23
P.22, P23
P.22, P23
41.
42.
43.
44.
Reference
Page
Note: Before switching the DIP switch key, be sure to turn OFF the power supply to
the Presenter.