User manual

- 13 -
30
30
30
30
30
30
30
30
Point the infrared emitting part of the wireless remote control unit at the infrared sensor
of the Visual Presenter, located on the top of the column, and press the button for the
desired function.
The receivable range may be narrowed when the Presenter is placed under sunlight,
near an inverter fluorescent lamp or in any other unfavorable surroundings. Depending
on the conditions of fluorescent lamps, etc. the sensor may fail to receive the infrared
light. In such a case, relocate the Presenter, or take other countermeasures.
Receivable range
Distance : Approx. 7 m (23 ft.) or less from the light receiving area to the front of
the wireless remote control
Angle : Approx. 30° degrees or less from the light receiving area to the front of
the wireless remote control rightward, leftward, upward and downward,
respectively
2. WIRELESS REMOTE CONTROL
Preparation
Remove the battery case cover by pressing downward on the [ OPEN] mark part in
the direction as indicated by the arrow. Install 2 pcs of batteries (type R03, AAA) into
the case in the direction as indicated there.
Note: Install the batteries with the right polarity.
Note: Change the batteries once a year.
Note: The batteries supplied with the Presenter are only for use in initially confirming
the operation of the Presenter. It is not guaranteed that these batteries can
work effectively for the indicated period.