Français P000~P000 Français P000~P000 Deutch P000~P000 Deutch P000~P000 English P54~P105 P00~P00 VISUAL PRESENTER INSTRUCTION MANUAL Please read this instruction manual carefully before using this product and keep it for future reference.
ENGLISH IMPORTANT SAFEGUARDS ■ Read Instructions – All the safety and operating instructions should be read before the appliance is operated. ■ Retain Instructions – The safety and operating instructions should be retained for future reference. ■ Heed Warnings – All warnings on the product and in the operating instructions should be adhered to. ■ Follow Instructions – All operating and use instructions should be followed. ■ Cleaning – Unplug this product from the wall outlet before cleaning.
ENGLISH ■ Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.
ENGLISH ■ Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: ● When the power-supply cord or plug is damaged. ● If liquid has been spilled, or objects have fallen into the product. ● If the product has been exposed to rain or water. ● If the product does not operate normally by following the operating instructions.
ENGLISH WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES. WARNING : Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
ENGLISH BEFORE YOU USE ■ The power cord applicable to the local power specifications is attached. Be sure to use the power cord applicable to your local power specification. ■ Do not leave this product under direct sunlight or by heaters, or this product may be discolored, deformed, or damaged. ■ Do not place this product in any humid, dusty, windy or vibrating location.
ENGLISH PART NAMES AND FUNCTIONS SETTING UP STORING OPERATION PROCEDURE VARIOUS FUNCTIONS AND OPERATIONS ABOUT RS-232C TROUBLESHOOTING SPECIFICATIONS 60
ENGLISH CONTENTS PART NAMES AND FUNCTIONS 1. PART NAMES AND FUNCTIONS Name of Each Part.......................................................63 Appearance........................................................................63 Functions ....................................................................64 SETTING UP Front Operating Panel ...........................................................64 Rear Panel ..........................................................................65 Side Panel ..
ENGLISH CONTENTS PART NAMES AND FUNCTIONS Focus.........................................................................91 Auto Focus..........................................................................91 Manual Focus......................................................................92 Iris.............................................................................93 SETTING UP Auto Brightness Adjustment.....................................................93 Manual Brightness Adjustment.......
ENGLISH PART NAMES AND FUNCTIONS 1 PART NAMES AND FUNCTIONS Name of Each Part ■ Appearance q Front Rear/Side e w r i t u ! y !0 o Front No. 63 Rear/side No. Name Name q Camera head o Side panel P.66 w Lamp head Lamp column Rear panel Cord cover P.65 e !0 !1 r Camera column t Infrared sensor y Front operating panel u Stage i Wireless remote control Open this cover when connecting/ disconnecting a cord. P.64 P.
ENGLISH Functions PART NAMES AND FUNCTIONS ■ Front Operating Panel q ww e ww r t y !3 !2 !1 u i o !0 * Hereinafter the menu items to be displayed/selected on the monitor or projection screen are referred to as "OSD (On-Screen Display)." Name Function q OSD ENTER (Fix) To fix the OSD item, select an image from the images in P.
ENGLISH ■ Rear Panel PART NAMES AND FUNCTIONS q Name w e rt y Image whose display is selectable with image select button Function q DVI OUT To output digital video signal to the projector, the (DVI Output Terminal) PC monitor or other DVI input device P.75 w RGB OUT To output analog video signal to the projector, the P.
ENGLISH ■ Side Panel PART NAMES AND FUNCTIONS q w e r Name q USB (Compliant with 2.0) w (SD Card Slot) e Main Switch r LCD Monitor Mounting Seat Function To transfer the data recorded in an SD card to the connected PC, or to transfer image or control the main unit by using the software contained in the Utility Software CD-ROM (Option) P.75 To insert an SD card P.
ENGLISH OSD (On-Screen Display) PART NAMES AND FUNCTIONS The menu items displayed/selected on the monitor or the projection screen are referred to as “OSD (On-Screen Display).” When the [MENU] button on the front operating panel or on the wireless remote control is pressed, the OSD menu is displayed on the monitor screen. By pressing the [MENU] button again, the OSD menu disappears.
ENGLISH Guide (State Display) *[ ON OFF Function To switch the posi/nega of the camera image • Factory setting for Nega Gamma (Gamma) : 3 To switch the Color/Black and White of the camera image Use this function to make the black-and-white document easy-to-read. To sharpen black-and-white characters and lines of image Use this function to view text document. To rotate the camera image by 180° when this function is ON To save the current setting position of the unit in the selected memory No. P.
ENGLISH OSD (On-Screen Display) PART NAMES AND FUNCTIONS Display example of the top and 2nd hierarchies White Balance R-Gain B-Gain Iris Edge Effect Gamma Auto/One-Push Manual 2nd hierarchy (Continued) Display example of the 3rd hierarchy (display for reconfirming the operation) NO YES 3rd hierarchy Top hierarchy ■ SD Mode (Menu when image stored in an SD card is in display) Name Function Top hierarchy 2nd hierarchy 3rd hierarchy Delete Current NO To cancel the delete (Delete) P.
ENGLISH PART NAMES AND FUNCTIONS 70
ENGLISH Wireless Remote Control PART NAMES AND FUNCTIONS q w !5 e !6 r y !7 u t y i o !0 !1 !2 !3 !4 Name q PRESET (State Save) w CALL (State Call) e (Memory No.) 71 !8 !9 @0 @1 @3 @2 @4 @5 Function To save the current setting state of the unit Use this function together with the memory No. To call the setting state Use this function together with the memory No. To indicate the memory No. P.94 P.
ENGLISH Name Function r (OSD i o !0 !1 !2 !3 !4 To display/cancel the OSD P.67 To fix the OSD item P.67 To select the OSD item, select an image from the split screen, scroll in digital zoom mode P.67 To cancel the OSD from the screen when the top OSD item is resumed P.67 POSI/NEGA (Posi/Nega) To switch the posi/nega of the camera image COLOR/B&W To switch the Color/Black and White of the camera image (Color/Black and White) Use this function to make the black-and-white document easy-to-read.
ENGLISH ■ Receivable Range PART NAMES AND FUNCTIONS Point the infrared emitting part of the wireless remote control at the infrared sensor of the main unit, and press the button for desired function. The receiving range may be reduced when the main unit is placed in direct sunlight, near an inverter fluorescent lamp or in any other unfavorable surrounding. Depending on the conditions of fluorescent lamps, etc., the sensor may fail to receive the infrared light.
ENGLISH 2 SETTING UP Setting Up Lift the camera column. Simultaneously, the lamp column is also lifted. (2) Turn the camera head. (3) Move the lamp column and the lamp head to an appropriate position as shown in the right figure.
ENGLISH Connecting of Video Cables SETTING UP q t USB terminal •To PC y r SD card w S-VIDEO OUT terminal •To TV monitor e DVI OUT terminal •To Projector •To PC monitor RGB IN terminal •To PC RGB OUT terminal •To Projector •To PC monitor VIDEO OUT terminal •To TV monitor To protect this product and the peripheral units to be connected to this product, be sure to turn OFF the power supply to all units beforehand. When plugging in/out the connection cable, hold the plug part of the cable.
ENGLISH r Connecting to the unit having the analog RGB output terminal Connect the analog RGB cable to the [RGB IN] terminal on the rear panel. • Specifications of the analog RGB input terminal of this product Signal allocation 5 4 3 2 1 Video signal : 10 9 8 7 Analog 0.
ENGLISH 3 STORING Storing (1) As shown in the right figure, turn the lamp head and the lamp column and fold them down on the stage. q STORING w (2) Turn the camera head and the camera column and fold them down on the stage.
ENGLISH STORING 78
ENGLISH 4 OPERATION PROCEDURE When connecting this product and the peripheral units, be sure to turn OFF the power supply to all units beforehand. Presentation using printed materials OPERATION PROCEDURE q Setting the main unit Set the main unit as show in the above figure, connect the main unit to the projector or the PC monitor, and then turn ON the power supply.
ENGLISH Presentation using SD card (Option) SD card OPERATION PROCEDURE Before starting the operation, insert an SD card (Option) into the SD card slot on the side panel. To remove the SD card, push it again, and it will come out. Before inserting or removing the SD card or turning OFF the power supply, be sure to select [Camera] [ ] with the [ ] button on the front operating panel or wireless remote control, and confirm that the output image has turned to the camera image.
ENGLISH Presentation using SD card (Option) (Continued) ■ Saving the Image (1) Press the [ ] button on the front operating panel or wireless remote control to switch the image mode to the Camera mode. ] button on the front operating panel or wireless remote control. (2) Press the [ ] mark lights up on the screen, the image saving starts. When this mark (3) When the [ goes out, the image saving is completed. Be sure to try out shooting and saving beforehand to confirm the normal saving of the image.
ENGLISH ■ Deleting the Image (1) Press the [ ] button on the front operating panel or wireless remote control or press the [ ] button on the wireless remote control to have the images in the SD card displayed on the full-screen or split screen. (2) Select the image to be deleted with the direction buttons [ operating panel or wireless remote control. ] on the front (3) Press the [MENU] button on the front operating panel or wireless remote control, and select the [Delete] menu on the OSD.
ENGLISH Presentation using “Utility Software” (Option) with the USB-connected PC OPERATION PROCEDURE Set [USB Mode] to [Application] on the OSD. "Utility Software" (Option) contains the PC link software “Image Mate for Presentation”, “Image Mate for Movie Creation” and the TWAIN driver "ELMO TWAIN DS" for the following operations: • Moving image saving to PC.
ENGLISH Transferring the images from the SD card into the USB-connected PC Set [USB Mode] to [Mass Storage] on the OSD. OPERATION PROCEDURE When this product is USB-connected to the PC, image data in the SD card can be transferred into the PC. The Operating System (OS) of the connected PC should be Microsoft Windows 2000(SP4 or newer)/XP(SP2 or newer). (1) Turn ON the power supply to this product and to the PC. (2) Connect this product to the PC with the attached USB cable.
ENGLISH Shooting off the stage Close-up lens holder OPERATION PROCEDURE When the camera head is set horizontally, wall, distant view, etc. can be shot. When the object is in the distant view, open the close-up lens holder forward. To shoot horizontally, turn the image by 180° by pressing the [IMAGE ROTATION] button or setting the OSD accordingly.
ENGLISH 5 VARIOUS FUNCTIONS AND OPERATIONS Lighting Front operating panel Wireless remote control VARIOUS FUNCTIONS AND OPERATIONS When the [ ] button on the front operating panel or wireless remote control is pressed, the fluorescent lamp lights up in 1 – 3 seconds. Each time the [ ] button is pressed, the fluorescent lamp turns ON/OFF alternately.
ENGLISH Zoom Front operating panel When the zoom dial [ Wireless remote control , ] on the front operating panel is turned or the zoom button [ Front operating panel , ] on the wireless remote control is pressed, the document display range can be adjusted. According to the zoom dial turning angle, the zooming speed varies in 3 steps (3-step speed VARIOUS FUNCTIONS AND OPERATIONS change).
ENGLISH White Balance Front operating panel VARIOUS FUNCTIONS AND OPERATIONS ■ [Auto/One-Push] (Auto Track / Auto Adjust and Fix) The Auto (auto track) mode for adjusting the white coloring automatically according to the document or lighting condition and the One-Push (auto adjust and fix) mode for maintaining the automatically adjusted state can be switched alternately.
ENGLISH Image Selection Front operating panel Wireless remote control VARIOUS FUNCTIONS AND OPERATIONS Each time the [ ] button on the front operating panel or wireless remote control is pressed, the image is switched in order of the camera image to the image inputted in the analog RGB input terminal [RGB IN], then to the image in the SD card, and then to the camera image again.
ENGLISH VARIOUS FUNCTIONS AND OPERATIONS 90
ENGLISH Focus Front operating panel Wireless remote control The focus on the object is adjusted. Wireless remote control VARIOUS FUNCTIONS AND OPERATIONS ■ Auto Focus When the [AF] button on the front operating panel or wireless remote control is pressed, the camera is focused automatically. This product is of one-shot auto focus type. That is, once the camera is focused, the auto focus operation is released, and then focus position is maintained.
ENGLISH ■ Manual Focus When the focus button [FOCUS · NEAR] or [FOCUS · FAR] on the wireless remote control is pressed, the height on which the camera is focused changes. This function is used for focusing the camera on any portion of a 3D object or the like. Wireless remote control Limit of focus adjustment: • With close-up lens TELE (Telescopic) WIDE (Wide-angle) • Without close-up lens TELE (Telescopic) WIDE (Wide-angle) : 305 – 405mm (12.0 – 15.9 in) from close-up lens : 50 – 405 mm (2.0 – 15.
ENGLISH Iris Front operating panel When the [IRIS · OPEN] button or [IRIS · CLOSE] button on the front operating panel or wireless remote control is pressed, the lens iris is adjusted for image brightness. This adjustment can be made in either of the following 2 modes, which are set in [Iris] on the OSD: VARIOUS FUNCTIONS AND OPERATIONS ■ Auto Brightness Adjustment ■ ([Iris] is set to [Auto] on the OSD.) It is so set that the brightness to be tracked automatically can be adjusted.
ENGLISH State Presetting The setting position of this product can be saved/called. Up to 6 positions can be saved. The presets that can be saved are as follows: • Current zoom field angle • Iris state • White Balance state • Edge Effect settings • Gamma value settings • Lighting ON/OFF • Color/B&W selection settings • Image Rotation state • Text mode settings • Posi/Nega settings Wireless remote control The saved state can be retained even if the power supply is turned OFF.
ENGLISH Mounting the LCD Optional Monitor To mount the LCD monitor (LM-5011N) on option, the LCD monitor bracket (MS-30) is required. LCD monitor LCD monitor bracket As show in the right figure, connect the composite video output terminal [VIDEO OUT] of this product to the LCD monitor (LM-5011N) with the video cable with RCA pin plug (supplied as an accessory on standard or available in the market).
ENGLISH 6 RS-232C SPECIFICATIONS This product can be controlled from a PC connected to this product through the RS-232C terminal [RS-232C]. Setting Up q Connect this product to a PC with an RS-232C cable. When using an RS-232C cable available on the market, make sure that pin connections are the same as below. To protect this product and the PC, be sure to turn OFF the power supply to all units before starting the connection work.
ENGLISH Data Format Specification This command is executed in the form of 1-command/1-packet. The next command is not accepted until the previous processing is completed. • The communication command always starts with STX (Start of Text), and ends with ETX (End of Text). • If the communication format of command name is wrong, NAK (Negative Acknowledge) will be sent from this product as a result of failing to receive correctly.
ENGLISH Transmission Specifications • • • • • • • Full duplex start-stop sync. mode Start bit Data bit Stop bit Parity bit X parameter Baud rate (Communication speed) : : : : : : 1 bit 8 bits 1 bit None None 9600bps UART Communication Format Commands, parameters and data are all transmitted in ASCII code.
ENGLISH Function File delete File lock File unlock Format Image save USB mode Gamma setting Image rotation Edge effect White balance Text ABOUT RS-232C Posi/Nega Color/B&W Local lockout Default Status request ROM version ACK check CR addition Command DE 0 1 SL 0 1 SU 0 1 SF 0 CA 0 UM 0 1 GM 0 1 2 3 4 5 6 7 RO 0 1 AP 0 1 2 3 AW 0 1 2 3 4 5 6 CT 0 1 NP 0 1 CB 0 1 LL 0 1 DF 0 QS 0 2 QR 0 1 2 SA 0 1 SC 0 1 Parameter (Current) (All) (Current) (All) (Current) (All) (Mass Storage) (Application) (γ = 0.
ENGLISH About Connection If the RS-232C cable is not connected correctly between this product and the PC, no acknowledgement is transmitted. Connect the RS-232C cable correctly, and fix it firmly with the connector set screws before starting the operation.
ENGLISH 7 TROUBLESHOOTING Symptoms and Confirmation Check the following items. If any abnormality is found, consult the seller from whom you have purchased this product or our branch/office near your location. Symptom No image is displayed on the TV monitor. The image is out of focus. The lamp does not light up quickly. The video output image is disarrayed. The image is too dark. The image is striped. TROUBLESHOOTING The brightness tone is out of order.
ENGLISH 8 SPECIFICATIONS ■ General Item Power source Power consumption Outside dimensions Weight Input selection Output terminal Input terminal Ext. control terminal Memory interface Specifications 12VDC (AC adapter: 100 ~ 240VAC) 30W (AC adapter included) 377×482×180mm (14.8×19.0×7.1 in) (When folded) 377×482×582mm (14.8×19.0×22.9in) (When set up) Approx. 4.7kg (10.
ENGLISH ■ Main Camera Item Lens Shooting speed Shooting area Limit of focus adjustment Optical zoom Digital zoom Focus Iris Image pick-up element Total picture elements Effective picture elements Synchronized signal Resolution DVI output Analog RGB output Composite video output S-video output White balance Video output selection Posi/Nega conversion Color/B&W selection Image rotation Text mode Gamma setting Edge enhancement Pause Image recording Split display Specifications f = 4.7 ~ 56.
ENGLISH ■ Supplied Accessories Name Power adapter Power cord (1.5m) Video cable (RCA pin connector) (3m) Analog RGB cable (DSUB 15P connector) (2m) Infrared wireless remote control Batteries (Type R03, AAA) Instruction Manual for P10 Warranty Card for P10 USB cable (1.8m) Quantity 1 1 1 1 1 2 1 1 1 ■ Options • 5˝ TFT LCD color monitor kit (LM-5011N) • LCD monitor bracket (MS-30) • Utility Software CD-ROM For the RCA pin, use a pin plug compliant with EIAJ RC-6703.
ENGLISH 105