Document Camera Instruction Manual

88
VARIOUS
FUNCTIONS
AND OPERATIONS
ENGLISH
State Presetting
The setting position of this product can be
saved/called. Up to 8 positions can be saved. The
presets that can be saved are as follows:
• Current zoom field angle (Optical zoom range)
• Brightness status
• White Balance state
• R-Gain (When the white balance is set to Manual)
• B-Gain (When the white balance is set to Manual)
• Edge Effect settings (When Graphics mode is selected)
• Gamma value settings (When Graphics mode is selected)
• Lighting ON/OFF
• Color/B&W selection settings
• Image Rotation state
• Mode settings
• Posi/Nega settings
The saved state can be retained even if the power
supply is turned OFF.
Rotated position cannot be saved to "Power On" setting.
(Memory No.8 on remote control)
■ Presetting
When the [PRESET] button on the wireless remote
control is pressed and then "within 4 seconds", the
memory number button on the wireless remote
control is pressed, the present camera using status is
memorized in the selected memory number.
When the [PRESET] button on the wireless remote
control is pressed and then the memory number [8]
button on the wireless remote control is pressed, the
contents of this setting are called when the power is
turned on the next time.
■ Calling
When the [CALL] button on the wireless remote
control is pressed and then "within 4 seconds", the
memory number button on the wireless remote
control is pressed, the settings of the selected
memory number are called. When [Call] → [Default]
on the OSD are selected, the factory-set settings are
called.
Wireless remote control
Wireless remote control
Wireless remote control