Instruction manual

- 14 -

(1) Turning OFF the Camera

• When the Camera is ready for operation

through the wireless remote controller and

POWER button is pressed, the Camera

power is turned OFF. (However, even after

the Camera is turned OFF, power is still being

supplied to the Camera as power supply to the

Camera is not OFF.)

• The image disappears, and the LED on the

Camera lights up in red. Now, no buttons on

the wireless remote controller are functional

other than

POWER button and ID

button.

• When the TIMER OFF function is ON (refer

to the settings in the OSD (On-Screen

Display) Menu screen on P.21), Camera

power is turned OFF automatically upon the

lapse of the set time.

(2) Turning ON the Camera

• When the Camera is OFF and POWER button is pressed, the Camera power is

turned ON.

• The image appears, and the LED on the Camera goes out. Now, the Camera is ready

for operation of all functions through the wireless remote controller.

• If the ID number is changed, the Camera power may not be turned ON. In such case,

redo the ID number setting, and press

POWER button.

[1] Power supply to the Camera

The Camera has no POWER switch. The power supply to the Camera is turned ON

when 12VDC is inputted to the DC IN terminal.

When power is supplied to the Camera, the Camera turns to the right and then to the

center automatically (viewed from the front), returning the Camera position to the

position set in advance.

4. OPERATION PROCEDURES

[2] Turning ON/OFF of the Camera power