Instruction manual

• When HOME button is pressed, the Camera turns to the front (and the lens moves

to the WIDE end) according to the factory settings. The home position can be set

freely with the preset No. “0.” (Press

PRESET button and then press 0

button.) After setting, when 0 button or HOME button is pressed, the home

position is loaded. (Refer to P. 17)

• If the Camera direction is changed manually by mistake, press

RESET button.

Then, the Camera remembers the last PAN/TILT position in memory.

- 15 -

[4] Lens operation

(1) Zoom operation

• The object is zoomed in (appears larger in the

screen) when

TELE button of ZOOM is

pressed, or zoomed out (appears smaller in the

screen) when

WIDE button of ZOOM is

pressed.

• When

TELE button or WIDE button

is held down for over one second, the zoom

speed increases.

[3] Operating PAN/TILT

• While watching the screen, press any of

(UP, DOWN, LEFT, RIGHT)

direction buttons for the direction in which

you want to watch the image.

• To change the direction minutely, jog the

direction button. To change the direction

largely, hold down the direction button.

• Two operation modes are available according

to the speed: AUTO mode changing the speed

according to the zoom position, and

MANUAL mode setting the speed manually.

(Refer to the settings in the OSD (On-Screen

Display) Menu screen on P.26)

1413