Instruction manual

- 27 -
[ 6 ] PAN TILT
Name
Factory Settings Function
[ 7 ] ALARM
Name
Factory Settings Function
To set the preset position [PRESET1 – 16] for movement
in case of input in the ALARM IN terminal <1>
1 ALARM IN1
ALRAM
LOCK
PRESET1
To set the preset position [PRESET1 – 16 AUTO] for
movement in case of input in the ALARM IN terminal
<2>.
2 ALARM IN2 PRESET2
To select the signal time [OFF, 0.1s, 0.2s, 0.5s, 1s, 2s,
5s] to be outputted from the ALARM OUT terminal <1> in
case of input in the ALARM IN terminal <1> or <2> and
the completion of the preset operation.
3 ALARM OUT1 0.1s
When this function is set to [ON], the ALARM OUT
terminal <2> is enabled.
When AUX button is pressed (once), the alarm
signal is outputted from the ALARM OUT terminal <2>.
When this button is pressed again, this function is set to
[OFF].
(Set this function to [ON/OFF].)
4 ALARM OUT2 OFF
When this function is set to [ON], as long as the input is
in the ALARM IN terminal <1>, other operations are
disabled. (Set this function to [ON/OFF].)
OFF
When the rotation angle exceeds 90˚(the Camera is
facing beneath), the image reverses upside down. For
example, the ceiling comes to the bottom of the image. In
this case, this Camera automatically reverses the image
vertically or horizontally.
To select the image reverse angle [OFF, 100˚, 110˚, 120˚,
130˚, 140˚]
(When the image should not be reserved, set this
function to [OFF].)
5 FLIP ANGLE 120
6