Instruction manual

- 31 -
10. TROUBLESHOOTING HINTS
No image or
dark image on
the monitor
Is the Camera main unit connected correctly with
the monitor with the video cable? Isn’t the
MONITOR IN terminal of the monitor wrong?
Out of auto
focus
Isn’t mode the Manual Setting mode? If yes, press
the AUTO button to return the mode to the Auto
Focus mode.
Isn’t a flat or fast-moving object shooted? (Some
objects are not suitable for the Auto Focus.)
Isn’t the infrared illumination intensive? Set
[CAMERA1] – [INFRARED] to [ON] in the OSD
menu.
Is the DC IN cable connected correctly?
Is the correct voltage (DC12V (DC11V-16V))
supplied to the outlet?
Isn’t the DC IN cable or the video cable damaged?
Isn’t there any disconnection or incomplete
contact?
Is the iris in proper position?
Isn’t the zoom on the TELE side and imaging a
dark, monochromatic object?
Isn’t the LED lighting in red? If yes, the Camera
power should be OFF.
Isn’t the OFF TIME function activated, turning
OFF the Camera power? (If the Camera power is
turned ON without being aware of this and the no-
operation status continues, the Camera power will
be turned OFF again.)
Is the high-speed shutter set?
Isn’t the monitor TV system different from the
signal of this Camera (NTSC)?
Symptom
P. 13
P. 13
P. 13
P. 16
P. 15
P. 14
P. 14, 21
P. 21
P. 16
P. 16
P. 22
Ref. PageChecking Point