Instruction manual

This Camera has no power switch. When checking and maintaining this
Camera, be sure to turn OFF the power supply to the main unit
beforehand.
This Camera is designed only for use indoors. Do not use this Camera
out of doors.
Do not leave the Camera under direct sunlight or by heater, or the
Camera may be discolored, or damaged.
Do not place the Camera in any humid, dusty, windy or vibrating
location. Use the Camera in the following environmental condition:
Temperature: -10 °C ~ 40 °C (14 ° ~ 104 °F)
Humidity: 30% ~ 90% (No condensation)
Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such
as thinner or benzin.
Do not directly point the camera lens into the sun, or the camera may be
damaged.
Caring for the batteries:
• If the Camera is not used for long time, take out the batteries from the
case.
• Do not use rechargeable Ni-Cd batteries.
• Do not use new and old batteries, or batteries of different type
together.
• Do not try to recharge or short-circuit the batteries.
This Camera is designed only for installation to the ceiling.
When installing this Camera, use only the dedicated fixing plate, refer to
the pages 9 to 13 of this manual, and carefully check the safety, such as
falling prevention.
- 3 -
HANDLING PRECAUTIONS