Instruction manual

- 6 -
Wireless Remote Controller
Button Name Function Ref. Page
1
FOCUS
ZOOM
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
POWER To turn ON/OFF the Camera power. P.14
PRESET To register the preset position. P.17
ID To set the ID No. when multiple Cameras are used. P.19
NUMBER To set the preset position and the ID No. P.17
RESET To readjust the position of the Camera head. P.15
AUX Alarm signal is outputted from ALARM OUT terminal (2). Prior P.18
setting of the OSD mode is required.
NORMAL To return the iris to the factory setting automatically. P.16
IRIS OPEN To open the iris. P.16
CLOSE To close the iris. P.16
AUTO To adjust the focal point automatically to maintain it in the P.16
“in focus” status.
NEAR To move the focal point near. P.16
FAR To move the focal point far. P.16
TELE To zoom in (TELE) the image. P.15
WIDE To zoom in (WIDE) the image. P.15
DIRECTIONS To change the Camera head direction by operating the P.15, 20
cursor on the OSD.
HOME To move the Camera head direction by operating P.15, 20
the cursor on the OSD.
MENU To turn ON/OFF the OSD display. In the hierarchical menu, P.19, 20
the screen immediately before appears.
CURSOR PAN/TILT To suspend the menu operation. P.20
PRESET
ID
NUMBER
NORMAL
CURSOR
PAN/TILT
AUTO
TELE
MENU
2
POWER
1
RESET
5
OPEN
8
AUX
6
CLOSE
9
FAR
11
NEAR
DIRECTIONS
HOME
12
15
16
WIDE
14
3
4
7
10
13
17
18
Note: The “” button is not used for normal operation.