Instruction manual

- 7 -

Point the infrared emitter of the wireless remote controller to the infrared sensor located on

the front of the Camera main unit, and press the button of the intended operation.

For the receivable renge, refer to the below figures.

Receivable range

Distance : Within approx. 7m from the infrared sensor front

Angle : Within approx. 60° right and left, approx. 10° above

and approx 30° below from the infrared sensor front

2. WIRELESS REMOTE CONTROLLER

Note: The infrared sensors may receive the infrared rays only within a

narrower receivable range or may not receive them at all depending

on the ambient environment, such as being placed under the sunlight

or near an inverter fluorescent lamp. In such case, relocate the

installation place of the receiving side or block off the sunlight.

10°

30°

60°

Side view Bottom view

Precaution for the battery

Remove the battery case cover by pressing downward on the [ ] mark part in the

direction as indicated by the arrow.

Install 2 pcs. of batteries (type R03,AAA) into the case in the direction as indicated

there.

Note: Install the batteries with the proper to and to polarity.

Note: For dry cells, be sure to use the size AAA.

Note: Change the batteries at least once a year or when even nesessary.