Earn BISSELL Rewards! Register your product today! See details on back page ® USER'S GUIDE 52C2, 61C5 SERIES 2 Thank You 3 Safety Instructions 4 Product View 5-7 Assembly 7-9 Operations 10-15 Maintenance and Care 16 Troubleshooting 17 Replacement Parts 18 Accessories 19 Warranty 20 Product Registration 20 Consumer Care product images may vary
Thanks for buying a BISSELL Total Floors® Vacuum We’re glad you purchased a BISSELL Total Floors® vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL Total Floors® vacuum is well made, and we back it with a limited warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your upright VACUUM. WARNING: To reduce the risk of fire, electric shock, or injury: ■ Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. ■ Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
Product view Upper Handle Cord Clip Select models include Pet TurboEraser® Tool or TurboBrush® Tool Power Cord Combination Dusting Brush/ Upholstery Tool Suction Power Indicator Carry Handle Quick Release® Cord Wrap Power Switch Easy Empty™ Dirt Container Stretch Hose Extension Handle Crevice Tool Post-Motor Filter* Specialty Tool** Lock ’n Seal™ Lever Pre-Motor Filter Hose Wand Base Height Adjustment Knob Edge Cleaning Port Pet Hair Lifter (select models) WARNING: Do not plug in your vacuum cle
Assembly Warning: The only tool you’ll need to assemble your vacuum cleaner is a Phillips screwdriver. Plastic film can be dangerous. To avoid danger or suffocation, keep away from babies and children. Locate and install filters Important: Before using your vacuum, make sure that all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. Your Total Floors vacuum comes preloaded with a post-motor foam filter.
Assembly Attach the vacuum hose & tools continued c. The hose guide/tool caddy should be attached at the bottom of the back of the vacuum. Slide into place and insert screw into the existing hole. Tighten securely with a Phillips screwdriver. 2. Line up the tabs of the Twist n’ Snap hose with the corresponding notches and turn clockwise. Slide the end of the hose into the hose wand base. Hose wraps on back of unit as shown on page 4. 3.
Assembly Handle Positions Using your foot, press the handle release pedal, located on the lower left side of the vacuum to recline to a cleaning position. 1. 2. 1. Upright – For storage and above floor cleaning with tools. 2. Normal Cleaning – Press handle release pedal once. This position is used for most household floor cleaning tasks. Operations Transporting your cleaner 1.
Operations Clean filter indicator The clean filter indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The clean filter indicator will remain green until the airflow is reduced. At that time, it begins to change to red. When the indicator is fully red, the airflow is significantly reduced or clogged by a dirty filter. Follow the steps on page 11 to clean your filters or there is a clog in the hose.
Operations Pet Hair Fabric Tool (select models): Use this tool on fabrics such as drapes, beds or anywhere else pet hair may collect. Long Reach Dusting Tool (select models): Use this tool for dusting large surfaces. TurboBrush Tool (select models): Use rotating brush action for small flat areas such as stair and cushions. Press gently down and pull toward you in raking motion; too much pressure will cause brush to stop rotating.
Maintenance and Care To maximize your cleaning performance and extend the life of your vacuum, it is very important that you empty your dirt container and check and clean your filters frequently. Follow the instructions on the following pages, and perform these simple maintenance steps: 1. Empty the dirt container when the dirt reaches the “Full” line on the container, or more frequently, to prevent overfills. 2. Check the pre-motor and post-motor filter regularly. Clean or replace as needed.
Maintenance and Care Cleaning the dirt container continued 5. If desired, the lower dirt cup may be washed in warm water. Make sure it is completely dry before reassembling. NOTE: Do not put in the dishwasher. NOTE: Use of moist parts/components in your unit will damage the motor and void your warranty NOTICE: Select models feature a Febreze® post-motor filter. For purchasing information, turn to page 17. 6.
Maintenance and Care Clearing Clogs 1. Turn the power switch off and unplug the vacuum from the electrical outlet. 2. Check the upper tank for build up or clogs. 3. If you notice dirt build up in the inner cyclone, follow instruction on how to clean the inner cyclone in page 10. 4. Check for a clog in the foot hose & edge cleaning port, the wand or in the hose. NOTE: When the indicator reads Red, there is a clog in the hose which is diminishing suction power.
Maintenance and Care Maintaining the Pet TurboEraser Tool and TurboBrush Tool The Pet TurboEraser Tool should be checked regularly for clogs and debris wrapping around the paddles. Select models include a TurboBrush Tool that follows the same maintenance instructions. 3. 1. Unplug unit from outlet. 2. Remove tool from hose or vacuum. 3. If clog is present or debris is visible, unscrew the two screws on the back of the Pet TurboEraser Tool to remove the faceplate and clear any obstructions. 4.
Maintenance and Care Check rotating floor brush and drive belt You should check your vacuum cleaner's rotating floor brush and drive belt regularly for wear or damage. You should also clean the brush and the brush ends of strings, hair and carpet fibers. This type of debris can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any debris that has accumulated under the brush cover.
Maintenance and Care Replace drive belt 1. Turn the power switch off and unplug the vacuum from the electrical outlet. Remove floor brush following steps 2-4 on page 14. rotating floor brush 2. 2. With the rotating floor brush removed from the vacuum cleaner, grasp the old drive belt and remove from the motor pulley. Discard the old drive belt. motor pulley 3.
Troubleshooting - Total Floors® Vacuum cleaner won’t turn on Possible causes Remedies 1. Power cord not plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker Vacuum cleaner won’t pick up dirt Possible causes Remedies 1. Incorrect height adjustment 2. Hose not attached to suction opening 2. Grasp quick reach handle and firmly push hose wand onto the suction opening 1. Adjust powerfoot to correct height setting 3. Crack or hole in hose 3.
Replacement parts - Total Floors® Below please find a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item 1 2 3 4 5 6 7 8 *Not all 1 Part No.
Accessories - Total Floors® Item Part No. Part Name 1 203-1740 Crevice Tool 2 203-7529 Pet TurboEraser Tool 3 203-1741 Pet Hair Fabric Tool 4 203-1228 Dusting Brush/Upholstery Tool 5 203-1368 Pet Contour Tool® 6 98Q1-A Shedaway® Pet Groom Attachment 7 203-2447 TurboBrush® Tool 8 203-1787 Long Reach Dusting Tool 9 203-8296 Furniture Tool 10 203-1768 Extension Wand *Not all parts are included with every model.
Warranty – BISSELL Total Floors® Vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Don't forget to register your product! Registering is quick, easy and allows us to serve you better over the lifetime of your product. You’ll receive: BISSELL Reward Points Automatically earn points for discounts and free shipping on future purchases. Efficient Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Alerts We’ll contact you with any important product alerts.
