Instruction Manual

Gold Drum HV Installation Guide (EtherCAT and CAN) Installation

MAN-G-DRUMHVIG-EC (Ver. 1.202)

|www.elmomc.com

Table of Contents

4.3.3.2. EtherCAT OUT

See Section 4.11.2 for the electrical diagram.

Pin on

EtherCAT OUT

Signal Function

1 EtherCAT_OUT_TX+ EtherCAT out transmit +

2 EtherCAT_OUT_TX- EtherCAT out transmit -

3 EtherCAT_OUT_RX+ EtherCAT out receive +

4/5 N/A

6 EtherCAT_OUT_RX- EtherCAT out receive -

7/8 N/A

Pin Positions

Standard CAT5e

Ethernet Cable

Table 7: EtherCAT Out Connector Pin Assignments

4.3.3.3. EtherCAT Link Indicators

The Gold Drum HV (High Voltage) can serve as an EtherCAT slave device. For this purpose it has

two RJ-45 connectors, which are designated as EtherCAT In and EtherCAT Out. Each of these RJ-

45 connectors has two status LEDs, which are shown in Figure 2.

Figure 2: Ethernet Connector LEDs

The green LED is the link/activity indicator. It shows the state of the applicable physical link and

the activity on that link.