Owner manual

Drum HV (High Voltage) Installation Guide Installation
MAN-DRU-HVIG (Ver. 1.602)
www.elmomc.com
17
3.1.2. Hardware Requirements
The components that you will need to install your Drum HV (High Voltage) are:
Component Connector Section Drawing
Main Power Cable VP+ N VN- 3.5.3
Motor Cable M3 M2 M1 PE 3.5.3
Main Feedback Cable
Main Feedback
(Feedback A)
Connects to Port A
3.5.6
Auxiliary Feedback Cable
(if needed)
Aux. Feedback
(Feedback B)
Connects to Port B
3.5.8
Digital I/O Cable
(if needed)
General I/O
Connects to the
I/O Port
3.5.9
RS232 Communication Cable RS-232 3.5.10.1