User Guide

Large Scallop Border

Create scallops for beautiful fabric edges.

Change stitch width to 2.5 or wider and stitch length to

0.3 or higher.

Draw two lines 2.5 cm (1˝) apart on the fabric with a

washable fabric marker. Insert pivot pin through line (A)

and place pivot pin in center pivot hole on table. Begin

sewing at line (Ba) and stop at line (Bb).

To form second scallop, insert pivot pin through line (A),

13 cm (5 1/8˝) away from first pivot point. Pivot fabric and

check that scallops will intersect. Begin sewing at line

(Bc) and stop at line (Bd).

Sew remaining scallops using same method. Trim fabric

away to create large scallop border.

Twin Needle Decorative Designs

Sew decorative stitches with a twin needle. Why not try

two different thread colors in the needles?

Turn OFF the power switch and insert twin needle.

Thread machine. See page 29. Turn ON the power

switch and select a design.

Decrease stitch width to 3.0 or less.

CAUTION: Twin needles are available in many different

sizes and widths. Before sewing, always turn the

flywheel to make sure the needles do not hit the foot.

Sew twin needle design.

Recommended stitches for twin needle: 02, 03, 07, 08,

10, 15, 16, 17, 19, 24, 25, 41, 48 and 60.

13cm

(5 1/8˝)