Operation Manual

15
IMPORTANT:
Before turning on your machine, clear
your table surface of anything that might
obstruct the carriage movement. If your
machine is in a cabinet, check that the
machine is even or above the cabinet
surface. (The carriage could possibly hit
the cabinet and disturb the sewing result.)
TURN ON THE POWER SWITCH.
LCD Touch Screen
The LCD touch screen will briefly show the machine
identification window and automatically open the
traditional sewing window with straight stitch 1 selected.
NOTE: After turning on the machine there is
approximately a six second delay before the LCD touch
screen becomes visible. (This is the required boot up
time and is not a malfunction.)
NOTE: Only a light touch is required when making a
selection on the LCD touch screen. Do not touch the
surface of the screen with any hard or sharp object,
such as pencils, pens, screwdrivers, etc.
Use a soft dry cloth to wipe clean the screen.
A Z
2 3
4
5 6
7 8 9
10
11 12
A
Auto
Adjust
3
1
SETSET
2 3
4
5 6
7 8 9
10
11 12
1
SET
?
Straight Stitch