Operation Manual

Attaching Hoop to Carriage

Lift up the presser foot. Rotate the hoop turnkey q so it

lies parallel to the hoop. With the hoop turnkey turned

towards the back, slide the hoop from left side of

machine. Position the hoop pins w into the holes e on

the carriage.

Rotate the hoop turnkey clockwise to lock hoop onto

carriage.

CAUTION:

Always allow plenty of room behind the carriage so it can

move freely. See page 83.

Never try to move the carriage by hand or touch the

carriage when it is moving.

Always return the carriage to store position before

turning off the machine. See page 19.

start

stop